... games will recognise its a 128K and provide their extensions (or not ... to just entering SPECTRUM in 128K Basic really I suppose.
and any functions that make use ... of code in the normal +2 ROMs (128k BASIC, PLAY, RS232 serial ...

... are slightly different from a 128K. The same trick doesn’t ... . Pattern of delays is different, and +2 doesn't have IR-delays ...

... are slightly different from a 128K. The same trick doesn’t ... . Pattern of delays is different, and +2 doesn't have IR-delays ... same timings on all machines, and my routine still breaks down ...

... roughly 71% (75% used in 128K and later models), this means that ... ), the brighted version is 7, and the non brighted version is ... the brighted version is 3 and the non brighted version is ... 2, giving a ratio of 67%.[/ ...

Try it in 48k mode you get the right answer no problem. Try it in a +3 no problem. Try it 128k or +2,+2A and you get crash :D

... Spectrum's, ZX Spectrum+, Toastracks, and +2's all will run on ... screen intact and everything, and this had loaded into the +2 perfectly. ... FUSE and Spectaculator, whether I'm using it in 128K+ or +2 mode ... it deliberately) on an emulated +2 - and as that's a game ...

... keyboard conflicts (real and emulation) ASWDX and IJKLM are set to ...
Kempston, Sinclair, Fuller, QWERT and QAOPM/Space can have 4 ... best to use Sinclair 1 and 2 with Kempston 31.
< ... -Con works with interface 48k, 128k, +2 grey only)
b) ...

... sort between blocks 1 and 2 that the program can ... loader program, a screen, and then a block of ... loader outside of Bleepload, and the TAP version (despite ... higher pilot tone) and display "Loading :- GLASS 2 01" on ... in 128K mode on a +3 in FUSE, and they ...

... . It starts on one interrupt and stops on the next. That ... clock speeds of the 48K and 128K, and something with no contention like ... tell if it's a 128K/+2 or +2A/+3.

... =30084]DreamWalker: Alter Ego 2[/url]
[img ... img]

2: [url=https://spectrumcomputing.co.uk ... for the toast rack and +2, side B was for ... the +2A and +3. I found that ... would run on any 128K model, so that's ... I've included - and so far I've ...

... was for the toast rack and +2, side B was for ... the +2A and +3. I found that ... B would run on any 128K model, so that's ... one I've included - and so far I've had ... with it on the +2. The author may tell ... A (for 48k, 128 and +2, since it uses the floating ...

... I checked on my grey +2, board issue 1:
... much as in yours 128K but it is there ... Interestingly, the screen is brighter and the font seems thinner but ... the cable for the 128k and see if it improves ... grey +2 board issue 3 with RGB analogue cable and the ...

... checked on my grey +2, board issue 1:[/quote]< ... by @guesser that the 128K machines were designed with a ... the cable for the 128k and see if it improves ... the screen is brighter and the font seems thinner[/ ... bombarded by “stray” electrons and light up. You can ...

... only work on the original 128K (and the +2, naturally). Doesn’t work ...

... only work on the original 128K (and the +2, naturally). Doesn’t work ...

... the +3. On regular 128k machines, only odd banks ... with use of the 128k banks in mind. It ... 're targetting the original 128k, the only uncontended banks ... up configuration of banks 5,2,0). So the easy ... which are different for the 128k and +3 models.

Our 48k version of RetroForce is faster than the 128k version, due to optimizations and timing differences that were forsaken in the 128k version (forsaken to allow us to add sound effects)...

... now and worked well. Tried alone and 2 players mode, 48K or 128K mode ... or before enter the room, and no freeze time.

... shelf.

3x 128K Spectrum
2 x 48k+ Spectrum
1 x Spectrum +2
1x Sinclair ZX 81 ... Commodore 64 (No stones inside and not drowned)
1 x ...

... saving PPC / SUBPPC / ERR_NR and setting the return line & ... line where the error occurred and checks the Spectrum model, ... a,d ;A =83 +128k; =65 +2; =233 +2A/+3/+3e< ... +3DOS call before calling (SYNRET) and the ((ERR_SP)) entry gets overwritten ...

... value of the B register, and measured the frequency of the ... Hz on both the 128K and +2A, and 1456.2 Hz on the 48K ... run it on a real 128K and +2A at the earliest convenience ... on the predicted execution time and then compare it with the ...

... />

[code]
48K/128K pattern
T states [0 ... state into the contention pattern, and the Y axis represents the ... opcodes the R/W actions and the associated contention delays occur ... , both T states 1/4 and 2/4 are contended.

... a 'new' tape) and my grey +2 came with SuperTest128.
128K "all events in one ... Decathlon like there is a 128K version of SuperTest.
...
The only reason 1 and 2 are that way around is ... as if there was a 128K "all in one" DTD ...

... on the +, the 128k and the QL that I ... 948735"]The very first and thus all subsequent models ... ' suggestions:

128K models : Should probably of all ... the Interface1 (1 not 2) to this, as in ... users given the serial and microdrive ports. This would ...

Seems it works perfectly on +2A and +3 but not on the 128k or +2 (grey)

[quote="ranma_simon;949329"]Seems it works perfectly on +2A and +3 but not on the 128k or +2 (grey)[/quote]
it works on any 128k model, where did you test it?

[quote="ranma_simon;949329"]Seems it works perfectly on +2A and +3 but not on the 128k or +2 (grey)[/quote]
I tested it on a real 128K and a +2A. The game works beautifully on both.

... on +2A and +3 but not on the 128k or +2 (grey)[/quote ... ]
it works on any 128k model ... the AUTO LOADING and the AUTO PLAY/STOP in 128K/+2 rom you ...

... on +2A and +3 but not on the 128k or +2 (grey)[/quote ... ]
it works on any 128k model ... the AUTO LOADING and the AUTO PLAY/STOP in 128K/+2 rom you ...