-
Bad RGB picture qualityHi I just received my RGB cable, and found out that the quality is not as good ex expected. [IMG]http://dl.dropbox.com/u/6845970/loader1.jpg[/IMG] …
... />
I have a Specturm +2a attached to a Samsung 2032MW ... -
Some ROM/EPROM questions...I've got a ZX Spectrum +, a +2A and +3 computers, and I've been using +3e project ROMS for a while in my +3. I was thinking about using an EEPROM or…
... got a ZX Spectrum +, a +2A and +3 computers, and I ... -
How to make a comp video cable for +2 greySorry to bog, maybe the clue is just laiden on another thread but.... I have just obtained a 128 +2 grey, fully working BUT the aerial signal is bad…
...
best than UHF signal" composite cable, to be used on ... a dedicated
composite input socket on the tv ... din socket pin 2 for composite signal and pin 1 for ... ) or,
using a dedicated composite socket on my LCD tv ... -
Amstrad MP3 TunerNot Spectrum related but may be of use to someone. Seems like the MP3 Tuner for CPC computers is pinned the same as the output of CPC's: 6 pin DIN,…
... this previously, I have taken composite video from pins 5 and ... -
Escape from Kharkhan 'new' gameHi all. For all fans of good games I present the English version of "Escape to Kharkhan". The Russian version was available for quite some time, but…
... you will need a 128k +2A or +3 because on original ... -
Problem with new DivIDE+ on ZX +2A?I just received DivIDE+ from RWAPSoftware and am having trouble getting it to work on my +2/A. The device came with 1GBCF card preinstalled with 3 ga…
I just received DivIDE+ from RWAPSoftware and am having trouble getting it to work on my +2/A. The device came with 1GBCF card preinstalled with 3 games. I closed the jumper inside to enable +2/A +3 compatibility, the two jumpers next to IDE slot are also ... -
+3e ROMs in AT28C256I've been thinking about loading the +3e ROMs in a E2PROM (AT28C256) to make the upgrades easier. It seems that is TTL compatible, and it takes +5v V…
... =A14. Also, in ZX Spectrum +2A/+3 schematics, pin 27=A14 ... -
RGB SCART Not Working on ZX 128K (heatsink)I've just received a SCART RGB to HDMI converter and it is not working with my ZX 128K (heatsink). I do have the correct 128K SCART cable (which is d…
... cable (which is different from +2A and +3 cable). I have ... a separate +2A,+3 SCART cable which I ... tested with my +2A and it worked beautifully on ... -
iXpectum 1.2 HD (iPad enabled) is out!iXpectrum now supports iPad on jailbroken devices ;) Thanks to Ryosaebaa for his support... You can download by now at: [url]http://code.google.co…
... 0xbffd if we're in +2A/+3 mode.
- In 128k ... models (not +2A/+3), when reading from port ... -
+2a Keyboard IssuesMy keyboard sometimes inputs 2 keys at once when I press a key. Sometimes it laggs behind the inputs. Is it possible to fix this by a e.g. cleaning o…
My keyboard sometimes inputs 2 keys at once when I press a key.
Sometimes it laggs behind the inputs.
Is it possible to fix this by a e.g. cleaning or will I have to live with that / replace the keyboard membrane? -
Picture interference on red areas.I recently got a 48K Speccy off eBay, did a composite mode and it seemed to work OK, but then my TV had to go off for repair so I didn't use it for a…
... Speccy off eBay, did a composite mode and it seemed to ... -
PSU differences for the n00bHi all, im the [B]n00b[/B] in question lol Sorry folks in advance for this cos its prolly been asked a million gazillion times! Im currently in po…
... number of differences between the 2a 3+ 128s and the rest ... -
Flash based rom replacement board for +2A/+3I'm sure I already started a thread about this, but I can't find it... Anyway, this post's to say that I've just sent off the order for the printed …
I'm sure I already started a thread about this, but I can't find it...
Anyway, this post's to say that I've just sent off the order for the printed circuit boards, so I should be in a position to be building some in a fortnight or so :D
... -
+3 assembler questionI was wondering if anyone could give any suggestions as to how to get this bit of code working on the +2A/+3 in 128k mode. It works on the +128k/+2 i…
... of code working on the +2A/+3 in 128k mode. It ... /128k mode, and on the +2A/+3 in 48k mode, but ... crashes the +2A/+3 in 128k mode. When ... -
Getting a ZX Spectrum to work in the USHello all, I'm terribly new to these forums but not to the use of the Spectrum. I have a few in my collection of old machines and one of them I am …
... it to run on a composite out signal, but I hear ... -
Memory mapping: Pentagon compatibility?I'm writing something that will rely heavily on the Spectrum's ability to switch screen buffers in hardware (port 0x7FFD). The original Spectrum 128K…
... RAM banking feature of the +2A / +3.
Port 0x1FFD ... -
Using Interface II joystick in kempston-only gamesHi everyone! It's me again, bothering you with new crazy ideas :) I have recently acquired an Amstrad +2A Speccy with a joystick and built-in Interf…
... have recently acquired an Amstrad +2A Speccy with a joystick and ... -
Loss of innocenceI suppose my ZX Spectrum era lasted longer than most (although not sure longer than most of you on here). I received my first Speccy back in '83, and…
... upgraded quite late to a +2A in 1988.
The ... -
Romsif I wanted to replace the roms on a speccy, what equipment would I need and what chips, for example let's say I wanted to replace my +2a roms with t…
if I wanted to replace the roms on a speccy, what equipment would I need and what chips, for example let's say I wanted to replace my +2a roms with the SE rom?
or could someone point me in the right direction? -
48K Speccy Repair Log.Some people may know my love for writing up my repairs of arcade PCBs on various forums so thought I would do the same for this little fella. Had th…
... board. I also did the composite video mod as troubleshooting this ... -
Speccy repairs?I've finally got round to testing all the various Spectrums that I seem to have accumulated over the years and discovered that "my" two machines (i.e…
... which work ok and some +2a's which also work fine ... -
light guns / none crt tv'sI'm just curious will someone come out with a way to use lightguns on newer tv's.. I mean on any console.. or say speccy / c64 a few things I have…
... that yellow thing for the composite, I noticed.. is that affected ... -
Help and Advice with DivIDE PlusHi Guys, Really struggling to get any reliable actiivty with my DivIDE Plus and am looking for some pointers. I am trying to get it to work with on…
... should be set for non- +2A/+3 spectrums.
[b ... -
Beastie FeastieThis game is only compatible with the +2A/+2B models, and it also only seems to work in 128k mode.
This game is only compatible with the +2A/+2B models, and it also only seems to work in 128k mode. -
Dicky DuckThis game by Beyker Soft is exclusive for +2A, +2B and +3 models, in 128k mode.
This game by Beyker Soft is exclusive for +2A, +2B and +3 models, in 128k mode. -
Hypersports, help!I suddenly felt like playing this great game, so I loaded in my +2A, but...I cant get past the 3rd level! The thing is that I dont remember when I h…
... , so I loaded in my +2A, but...I cant get past ... -
TR-DOS and DIVIDE emulationSome ZX emulators ([B]SPIN, FUSE, SPECEMU, SPECTACULATOR[/B]) contain configuration menu with possibility select ZX Spectrum model and interfaces. Bu…
... model (ZX48/128/+2). On +2A and +3 is it impossible ... -
Schematic ErrorThere appears to be an error in the Schematic for the 128k +2A and +3 the error is present in both the redrawn TIF version and the original drawing …
... the Schematic for the 128k +2A and +3
the ...
