-
+3 disc imaging (idea + SDP)Following a bit of research, which you can probably see in the "old code" thread, I had an idea for a bit of software that may be useful (for me, and…
[QUOTE=guesser]The +3 has a RS232 port, ... program at the +3 end were to just read every byte ... - each track of a 3" disc is only about 5Kb ... board it's possible to save directly to a partition on ... data would just be written to tape (a standard SAVE "name" ... -
+3 disc imaging (idea + SDP)Following a bit of research, which you can probably see in the "old code" thread, I had an idea for a bit of software that may be useful (for me, and…
... about - ripping disk images to tape/disk.
... heavily protected 3" disk and required DB2 to be in ... by track to tape, for restore later (saves to tape at normal ... and write it back to a 3.5" disk unless ... +3DOS THINKS it's writing to ... -
+3 disc imaging (idea + SDP)Following a bit of research, which you can probably see in the "old code" thread, I had an idea for a bit of software that may be useful (for me, and…
... that a 3" drive can be connected to a PC, ... both directions). The +3 solution will generally still requires ... disks, or are dumping to tape. It seems easier for ... have a 3.5" drive fitted to your +3, you can ... even write images back to ... -
+3 disc imaging (idea + SDP)Following a bit of research, which you can probably see in the "old code" thread, I had an idea for a bit of software that may be useful (for me, and…
... any reliability problems reading/writing +3 discs. I've had virus ... ve not actually tried the 3" -> 3.5" cable hack - I ... br />
[QUOTE=obo]The +3 solution will generally still requires ... swap disks, or are dumping to tape.[/QUOTE]
Kinda, but ... -
+3 disc imaging (idea + SDP)Following a bit of research, which you can probably see in the "old code" thread, I had an idea for a bit of software that may be useful (for me, and…
... of protection was given to +3 floppies? Strange formats on ... (which is then saved to tape), and loops around until ... (the RESTORE disk from tape option) simply does a ... is a +3 file and won't save to tape easily. ... the +3 version even though it is reported to do ... -
files on +3 discHello! I have question. As you know, when Spectrum +3 loads CODE file from tape, you can get by CAT command from audio header to which address it…
... (+3 converts all filenames to upper case), but ARE from tape.
3 720K disk images to a real tape for you to use on your +3 ... or tape, subject to you providing me with a 3" disk or tape, and ... paying the return postage to wherever ... -
files on +3 discHello! I have question. As you know, when Spectrum +3 loads CODE file from tape, you can get by CAT command from audio header to which address it…
... +3. I can copy files from a: to m:, but can't to tape ... /> You know of software to copy from tape to disk? I looked all ... works). I will please you to send me a catalog. (nekdo123 ... -
ANN: SP1 for Z88DK (aka splib3, Sprite Pack v3.0)Well it's finally arrived, after a month of "a few days from now" release deadlines. SP1 is the lastest version of splib, a flicker-free software sp…
... the amount that is going to have to be explained. If you ... dump the currently executing program to tape or disk. For backups, you ... (I*256+2), (I*256+3). Had peripheral id 1 been ... will need to link to the library during compilation "-lim2" to use it ... -
Disk R Tape ???I was recently trying to make a bootable disk image (for my Deal or No Deal simulator, if you must know) using RealSpectrum, SPIN to make a blank ima…
... NO" it's not supposed to do that. However, if you ... 've set the default drive to "T:" then it's ... . If you've tried to boot off the main menu ... , then the +3 tries to load something from tape. Break out of ... you mention on my real +3 - maybe you have discovered ... -
Disk R Tape ???I was recently trying to make a bootable disk image (for my Deal or No Deal simulator, if you must know) using RealSpectrum, SPIN to make a blank ima…
... +3 uses the standard tape LOAD/SAVE commands. You can refer to ... all subsequent saves will be to tape
or, you ... SAVE "T:program" will save to tape
there is an annoying ... br />
For anything refering to the B: drive, simply substitute ... -
Machine Code noviceHi, I'm starting to learn machine code and wanted to know if you have to use some sort of program to write machine code? Thanks,
... memory. Save the resulting code to tape as a CODE file. Then ... crashes - load your code from tape - amend your program - poke the ... - swear at yourself for not saving the sourcecode first... -
What should I get??I want to add a Spectrum to my collection but having come from the Atari/Commodore/TI/Apple world, I am a little unsure what to get? Something that …
... real experience get Spectrum 48K, tape recorder, some television or ... - download it, and transfer to tape (if has no better storage ... storage solution for Speccy - +3 has built in floppy. But ... ... uses 3 inch floppies, which are hard to find. Unofficial ... -
tapper on xpdoes tapper work on xp? planning to convert tzx to voc to wav
... my deck recorded from cd to tape
the 2a ... has no audio input to load from other sources< ... and i would really like to have the games on casettes ...
put 3 wavs :1-hero 2- arkanoid ... 128 3-outrun 128
... -
tapper on xpdoes tapper work on xp? planning to convert tzx to voc to wav
... +3 manual;
[code]TAPE/SOUND socket on the +3 Cassette ... unit
To EAR ... -
Loading from XP to a real spectrum.Is it possible using the output from a soundcard of an XP box to load programmes to a real spectrum?
... enough, yes. But, according to my experiences it will not ... built in tape recorder) and play out with close to 100% ... no need at all to mess about with changing ... frequencies, all you need to do is make sure ... is correct, somewhere around 3/4 to max just the same ... -
Disk file transfer utilities ?Are there some PC programs for transferring Speccy software between common emulator formats like TAP to disks or disk images? I mean here about +3 f…
... I found some proggy for +3 floppies, 'surprisingly' also based ... .
Actually, I started to make some floppy imaging program ... already made.
About saving to TAP: I finished program Drive ... files. Versa: can write to drives/images from TAP, SNA ... -
SupadriveHere's an MDR image of Supadrive. Works with Spectaculator, but I haven't tested it with any other emulators. [url="http://www.superfudge.demon.co.u…
... 2nd pass - 64 sectors 190 to 127
3rd pass ... 4th pass - 62 sectors 062 to 001
After ... saving sectors?
Answer y if you want to press a key to ... ?
Answer y to set write protection in ... br />
3. Drive to copy from? ( 1 to 8 )
... -
SupadriveHere's an MDR image of Supadrive. Works with Spectaculator, but I haven't tested it with any other emulators. [url="http://www.superfudge.demon.co.u…
... In practice this makes a tape backup of the "Supadrive" ... very difficult to be backed up to tape.[/INDENT]
3. Cartridge ... The "Supadrive" program appears to load parts of the "?FGL ... "?FGL???Zdd" sectors back to cartridge, but repeat 4 times ... -
The 128 plus 2 wasn't very goodHaving looked at the review in issue 33 of Crash of the Spectrum Plus 2, it strikes me as a bit odd, as if Simon Goodwin had to like it. I remember r…
... +2 was an excellent machine to use - the ROM was far ... work very easily just by saving to it.
Amstrad needed ... to get a new Speccy out ... the keyboard, tacked on a tape deck (mine still works fine ... -
Chip tracking on a speccyhey. im a long time tracker. but new to the ZX spectrum, i just heard some AY riders music and i find it very good! how would i go about tracking on …
... or grey +2. (Avoid the +3 - many of them have a ... 8-10. Protracker (no relation to the Amiga one) is the ... clones.
Re copying to tape: [url]http://www.worldofspectrum.org ... ]
As an alternative to all the above, you can ... -
How to save TZXGreetings to all. I am starting to move on from just games into some testing of home made programs. Although I could have done that in ancient tapes…
... : INK 0: CLS
3 POKE 23739,111: LOAD ""CODE ... address 32768 and copy it to the display. This way ... its drawn. The poke is to stop the Program: or ... before RUN 10.
To use type RUN 10 first ... then delete lines 10 to 50.
To save to tape type, SAVE " ... -
What`s your all time favourite three filmsWhat`s your all time favourite three films, stretch it out by all means if it`s hard to decide on just three. Wanting to watch some cool stuff over C…
... /music/imagery transports me instantly to being a kid again
3) Saving Private Ryan
Big ... -
Scrolling Loader CounterPlease can someone help me with writing a scrolling counter for a loading system. I like the Hewson counter so i`ve taken the font from zynaps loade…
... and set attributes(1,2,3,4). (For when screen ... br /> Press 'm' to poke co-ordinates/attributes.
Press 'l' to load a screen.
... attributes.
Press 'x' to save personalised loader.
< ... screen will be saved to tape after the loader. You ... -
Rubber Keyed SpeccyHi All Just bought myself a rubber keyed 48k Spectrum, thought I would have a trip down memory lane. Now thing is over the years the old brain cel…
the other thing you can do (how I use my spectrum+3) is to hook your tape lead up to your PC soundcard to play the tape available from the archive straight in, using one of the emulators with realtime tape loading, or a plugin for winamp etc. -
Opus Discovery 720K DriveOK, so I bought an Opus Discovery recently. Went through a whole process of fitting a second drive, which I know to be 720K. Eventually got the thin…
... error if I try to format to 720K on a ... parameters? I had to dig pretty deep to find a program ... disassembly on WOS) to allow the drive to be selected. ... you can format a 3" drive to whatever you want (with ... />
You could try saving 720K worth of data on ... -
128 won't loadI been trying to load a 128k speccy programme ( the fantasy one that came with the speccy 128 ) into a 128k heatsink speccy but it gets so far and th…
... TNS 128 onto +3 disk thanks to Kobrahsoft's SP3 Tape to +3 utility (which ... as you really need to understand machine code to save those headerless ... A. It only does speedlock to tape, but then you can put ... the tape file onto disk easily enough ... -
Using PC or Mac as a slave?For my Atari 8-bit I use an Sio2PC cable (with a USB2Serial adapter) to connect to my Mac so that I can store disk/tape images on the Mac as images. …
... connected to my Speccy. Works great - much better than a real tape ... deck! You need to tweak the volume to the right ... level - I find about 3/4 to ... -
Proper emulation of the basic SAVE command?Most emulators respond to the SAVE command by saving the file to a virtual tape, but without sending the audio to the soundcard. Is there an emulator…
Fuse will output to the soundcard if you turn off tape traps. I ... 's far easier to code than saving to a virtual tape. Which emulators are ... -
+3 Drive B ConnectorI've heard some people say the pinout in the manual for the +3 is incorrect and is actually in reverse. Does this mean that pin 34 on the connector i…
... br /> You then need to know how to connect an odd wire ... with an even wire. Fortunately, the 3 ... it to tape, then load it in and save it to a 3" ... disk. You can now get it to ...
If you decide to put the 3.5" drive plug into ... -
Memories of ThanatosI was playing this again last night and was amazed at just how great the graphics are. The size of the dragon, the way it swooshes around the screen,…
... an order off and got to keep the games for a ... at 9am or so as to get in early and have ... the place to myself, and borrow a couple ... Rs. 10 per tape. I then had 3 days to play and return ... the tape. Of course, I ...
