-
QL Case ScrewsHiya - here is a bizarre question, can anyone tell me what type the screws that held the QL case together were originally. My QL has had a hard time…
... what type the screws that held the QL case together were originally ... hard time and all the case screws have been lost by previous ... like to get the correct screws for it if possible, I ... buy the correct screws instead of the wrong screws.
Cheers ... -
Wanted: Spectrum case screwsMy rubber key Speccy is missing three of the five case screws, the one in the middle and two in the back. In addition the spectrum is missing the scr…
My rubber key Speccy is missing three of the five case screws, the one in the middle and two in the back. In addition the spectrum is missing the screw that fastens the motherboard to the case.
Is there anyone with extra screws laying around? -
Raspberry PI in a Spectrum 48k+ case Keyboard OptionsHi, I was lucky enough to get an empty Spectrum 48k+ Upgrade Kit Case on eBay. This is good because it doesn't involve taking apart a good Spectrum a…
... get an empty Spectrum 48k+ Upgrade Kit Case on eBay. This is ... number "Upgraded" on bottom. The 48k+ case has slightly more space to ... Pi compared to the original 48k case. The only problem is I ... always very fragile on the 48k\48k+ so I need a solution ... -
+2A case screwsDoes anyone know what type screws the +2A's case takes? My case is missing all the screws. Thanks. Paul
Hmm, I never did figure this out. Can't be too hard though, unlike the friggin' 48K case screws...
B -
Wanted: Rubber key Spectrum 48k case for projectHi all, As mentioned elsewhere, I'm after a Spectrum 16/48k (rubber key) case (no internals required) to house a Raspberry Pi board. Condition woul…
Hi all,
As mentioned elsewhere, I'm after a Spectrum 16/48k (rubber key) case (no internals required) to house a Raspberry Pi board.
Condition would need to be fair/good, at least.
Thanks -
Looking for a Spectrum 48k+ caseJust putting out a question here if anyone has or know where I can get just the case of a Spectrum 48k+ to put my Issue2 board + upgrades in?
Just putting out a question here if anyone has or know where I can get just the case of a Spectrum 48k+ to put my Issue2 board + upgrades in? -
Spectrum + upgraded and Spectrum 48K case/keyboardHere we have a Spectrum + that says upgraded on the back, it is well used but not for around 15 years or so, but does appear to still fire up so shou…
... have a empty case and keyboard for a 48K Spectrum photos here ... -
+2A case screwsDoes anyone know what type screws the +2A's case takes? My case is missing all the screws. Thanks. Paul
Does anyone know what type screws the +2A's case takes?
My case is missing all the screws.
Thanks.
Paul -
How many New Style "Speccy" PCBs are Made to Fit in an "old style" 48K Case? And what are their names? Most of them are produced in small batches so there could be quite a few small variations. Many of these are not produced…
... try to replicate an original 48K Spectrum (to some extent at ... into an old style 48k original Spectrum case .So can these PCBs ... -
48k+ feetdoes anyone know where I can get a foot, and a pair of springs, for my 48k+ case. I asked rwap at the VCF. He didn't have any with him and said he'd…
does anyone know where I can get a foot, and a pair of springs, for my 48k+ case.
I asked rwap at the VCF. He didn't have any with him and said he'd look when he got home but I never heard anything back from him... -
48k caseIs it possible to put a board out of a 48k+ into a 48k Speccy?
Is it possible to put a board out of a 48k+ into a 48k Speccy? -
Wanted: Spectrumy Stuff =)Hello my fellow WOS'ers I am after the following so I can [b]finally[/b] complete some projects 4 sets of Spectrum 128 +2A/B case screws 3 sets of …
... +2A/B case screws
3 sets of Spectrum +3 case screws
4 ...
1 set of spectrum 48k rubber feet
1 Spectrum ... 48k top metal plate
... -
Screws for a +3Hi, Occasional lurker, resident of comp.sys.sinclair back in the 90's (not under this name). I've got a +3 here, but the only thing is that it has …
... is that it has no case screws in it. None at all ... idea what size/type of screws I need?
I ... CPC has with shallow machine screws on the disc drive side ... , and deeper screws underneath. The 6128 also has ... -
Spec 48K case with a twist...Some people will have heard of the [URL="http://www.worldofspectrum.org/forums/showthread.php?t=37746"]Harlequin[/URL] project under way which is a r…
... took an old rubber key case I had lying around which ... .jpg[/IMG]
The case was sprayed with while Plastikote ... -
Rubber key case screws?Just lost another screw between the small gap between the floor and the skirting board behind my desk (ironically, when trying to measure it to deter…
... a replacement source for these screws?
I did find ... -
Spectrum 48K Case - I've not seen this type before have you?Picked this empty case up as part of a large ebay bundle this week. Not seen this type of case moulding before or the logo like this either. Anyone…
Picked this empty case up as part of a large ebay bundle this week. Not seen this type of case moulding before or the logo like this either. Anyone know anything more about this?
[img]https://pbs.twimg.com/media/CU6zrqdWcAE7liZ.jpg[/img] -
Rubber key case bottomI'm looking for a 16/48k case bottom to replace my current one that is slightly warped from heat.
I'm looking for a 16/48k case bottom to replace my current one that is slightly warped from heat. -
Upgrading Harlequin 48K to 128K?I noticed this upgrade PCB on ebay for upgrading the Harlequin to 128K: http://www.ebay.co.uk/itm/ZX-Spectrum-Harlequin-48K-to-128K-Upgrade-Addon-PC…
... .uk/itm/ZX-Spectrum-Harlequin-48K-to-128K-Upgrade-Addon-PCB ... of a 128K inside a 48K case. -
Cleaning you speccy?I was wondering what would be ok to use for cleaning the outside of your speccy? Im thinking about something that would be safe and not remove the l…
... I actually stripped the case down and chucked all the ... the spectrum into the seperate case parts, circuit board, keyboard ... /> Don't wash the screws as you don't want ... the top of the case up and giving it ... stripe diamond on the 48k+ case has a clear plastic ... -
So what is the best Spectrum?I've had a search and even though i can remember a similar thread somewhere I'll twist it a bit. Whats the best "unmodified" Spectrum? (modification…
... I hate it when someone screws up a shipping quote and ... a TS1000 with a Speccy 48K case/keyboard. No way I ... keyboard and a cool looking case. It's probably what ... should have had for a case/keyboard. But hey, I ... Plus/4 had a neat case and a great keyboard. ... -
Lot's of Sinclair parts and sparesI have really a lot spares at home, like: - ULA's - All kinds of RAM chips Many of these parts have already been tested. Most of these parts are pu…
... +2A/B case screws
3 sets of Spectrum +3 case screws (including side ... FDD screws)
4 sets ...
2 sets of spectrum 48k rubber feet
Can ... -
Lot's of Sinclair parts and sparesI have really a lot spares at home, like: - ULA's - All kinds of RAM chips Many of these parts have already been tested. Most of these parts are pu…
... +2A/B case screws
3 sets of Spectrum +3 case screws (including side ... FDD screws)
4 sets ...
2 sets of spectrum 48k rubber feet
Can ... -
Clamping Speccy InterfacesThere are a huge number of broken Speccy interfaces available . I came across one on Ebay recently said to be "partly working" or similar .Why are th…
Fitting the Spectrum 48k to the top clamp ... to help namely a spare 48k case that could be used ... the drill holes for the case screws that hold it all ... as holding the Spectrum case together in other words ... I had to use longer screws together with match sticks ... -
Spectrum USB KeyboardI know you can buy these but how do you make one . What I am thinking of be similar to the type described in Issue 1352 of Micro Mart at page 45 .The…
... - a new membrane , a case , the rubber mat and the ... side of the old 48K case with no screws .Next I pushed ... PCB needs no screws to fit in the case .When I ... into a repaired DK keyboard case . The only thing I ... well inside the old style 48k case . I reckon it would ... -
***BROKEN*** ZX Interface 1 - Free to a Good HomeAnyone interested in a ***BROKEN*** ZX Interface 1? It's such a long time since I've looked at it that I cannot remember the exact nature of the fa…
... are a couple of the case screws. Lord only knows where they ... -
eBay woes - Am I being unreasonable?I recently bought a +2 (grey) on eBay, and I have contacted the seller to complain about the condition of it. So far, they haven't replied. Do you th…
... /> * - All but one of the case screws are missing, so the unit ... -
Spectrum +2ASpectrum +2A (Black) Bought from an e-bayer a while back, but it's sitting under my bed collecting dust. Motherboard perfect and working fine, as i…
... deck knackered as flywheel shredded, case marked, and person I bought ... repair on the tape deck. Case screws missing too.
Useful ... -
Issue 3 board - Free to good homeI have an issue 3 board that someone could scavenge for spares or even repair if they're willing to pay the p&p. I got it off someone on Amibay in a…
... someone on Amibay in a 48k+ case with the seller saying it ... -
Re-painting 48k caseAnyone ever had any success touching up the paint on faceplates or making the spectrum logo white again?
Anyone ever had any success touching up the paint on faceplates or making the spectrum logo white again? -
Toastrack refurbishmentYesterday I opened a drawer in my old desk and discovered 2 complete toastrack 128s and a board only for the same. As I already have a fully working…
... a 128k board into a 48k+ case and adding a makeshift heatsink ...
