-
Spectranet updateHi all It's been a busy summer, and in any case I've wanted a little bit of a break from doing Speccy stuff to avoid it getting old (pun intended). …
... />
Finaly managed to get my +2 to connect to the tnfs server.
I've had to use ... a network cable direct to the pc/server ( doesn't need to ... tried both).
Had to give the speccy a fixed ... -
Edge connector breakout board/level translator boardFor a new project I'm thinking of working on (gah, too many projects...) I'm going to be making a new edge connector breakout board. Basically what …
... pointed out earlier, as opposed to independent level shifters its cheaper ... XC95xx series CPLD to not only provide 5volt to 3.3 ... programmed via JTAG / ISCP to perform the operations required for ... on the break out PCB to connect to the PC.
< ... -
Fuse and Raspberry PiHaving trouble getting fuse to start on the Raspberry Pi from the command line, it runs fine in Debian Wheezy but when I try running from command lin…
... board and wires soldered to the controller's pads ... , connected the membrane to the usb board using the same ... that to the pins on the long usb connector ... /> Hooked it up to my pc and opened wordpad and started ... you used on the long usb connector).
... -
Hardware for Fuse and other emulatorsok this is about hardware but not about the speccy so i didnt know where to put this. Anyway I am going to build a spectrum using the Pi and Fuse bu…
... option to connect using HDMI)
[*]Only 1 ready-to-use USB connector ... : probably no -easy- way to hook up modern HDD's ... a SSD should you want to)
[*]Does a ... [I]not[/I] easy to find these days.
... alternatives, IMHO it would have to be [I]very[/I] ... -
Hardware for Fuse and other emulatorsok this is about hardware but not about the speccy so i didnt know where to put this. Anyway I am going to build a spectrum using the Pi and Fuse bu…
... lastnight one of my old pc's which is a pentium ... . I am tempted to get a SD to IDE and use my ... 16gb sd card in it to cut down on heat and ... part anyway and it will connect to my main computer for anything ... .
I am looking to built this as an all ... -
Zero 0.5 ReleasedAfter a bit of a hiatus, the next update of Zero is now available [URL="www.ramtop.wordpress.com"]here[/URL]. Feedback and bug-reports appreciated! …
... /> I love to use arrow keys @ my PC keyboard to navigate through ZX ... but when I try to set my PC USB connected joystick as KEMPSTON ... ? I mean is it impossible to use KEMPSTON at 128K machines ... -
Zero 0.5 ReleasedAfter a bit of a hiatus, the next update of Zero is now available [URL="www.ramtop.wordpress.com"]here[/URL]. Feedback and bug-reports appreciated! …
... but when I try to set my PC USB connected joystick as KEMPSTON ... ? I mean is it impossible to use KEMPSTON at 128K machines ... -
Windows 8 selling well...[Img]http://cultofmac.cultofmaccom.netdna-cdn.com/wp-content/uploads/2013/01/downgradetowindows7.jpg[/Img] When suppliers start selling downgrades y…
... you are using the pc for.. as they keep ... music folks were using to measure DPC latency, which ... software vendor has coughed up to their bug.
to do is boot & connect to the internet. ... things are more likely to go, highly connected but ... -
QL Micro Peripherals floppy interface questionI am looking for the floppy interface standard (Shugart or IBM) for the Micro Peripherals interface for the QL, to know how to configure floppy drive…
... a straight through cable to connect to the drive and ensure that ... or some jumpers to select this).
PC drives are of ... course set up to be DS1 ... 12 on the floppy cable to overcome this. -
QL Micro Peripherals floppy interface questionI am looking for the floppy interface standard (Shugart or IBM) for the Micro Peripherals interface for the QL, to know how to configure floppy drive…
... straight through cable to connect to the drive and ensure ... some jumpers to select this).
PC drives ... are of course set up to be DS1 ... on the floppy cable to overcome this.[/QUOTE]
PC floppy drives to DS0.
... -
Adding IDE to your Spectrum +2 A/B (or +3)Hello my fellow [B]WoS'ers[/B] [B]This is a shared thread with [url]www.amibay.com[/url] which you can [URL="http://www.amibay.com/showthread.php?t=…
Quick question, would a push switch from an old PC (the reset one) be suitable to use to connect to the NMI pins? -
Adding IDE to your Spectrum +2 A/B (or +3)Hello my fellow [B]WoS'ers[/B] [B]This is a shared thread with [url]www.amibay.com[/url] which you can [URL="http://www.amibay.com/showthread.php?t=…
[QUOTE=jamorski;682653]Quick question, would a push switch from an old PC (the reset one) be suitable to use to connect to the NMI pins?[/QUOTE]
That's exactly what I used in my spectranet case, an old PC reset button :D -
Setting up an IDE HDD on the +3e helpHello, Just installed a HDD in my +3e (ROM ver. 1.11). When turning on it takes a few seconds longer but then shows 2 IDE (available) as well as 1 fl…
... br />
The simplified FORMAT TO command syntax was introduced in ... v1.28. Prior to that you had to enter the drive ... this syntax:
FORMAT TO unit, cylinders, heads,sects,#maxpart ... HD /CF, you will have to connect it to PC and
take the ... -
Spectrum +3 Transfer games onto DiskHi, I have a Spectrum +3, and also use Spectaculator on my PC. I can load games onto my real spectrum from the Emulator by using one of the tools a…
... will only snapshot games to disk if they only ... kits which allow you to connect a PC 3.5' floppy drive ... to the drive B ... snapshot emulator images(SNA) to disk images. I think ...
Another option is to buy a Divide interface which ... -
Interface 1 bisOk, well the postmans just been and brought with him my new arrival, the Interface 1 bis. So as promised I thought I'd share some initial usage exper…
... TIM_50 ; Set time-out to 50ms
[/FONT]
Connect a joystick to the interface's port
- Connect the interface to a USB ... port of the server
- Hold the joystick to ... 'plug', when referring to powering the ZX Spectrum. ... -
A new site for an old projectThe 'Interface 1bis' project site has been moved to: [url]https://sites.google.com/site/interface1bis/[/url] In fact, it's not only a simple relocati…
... requests.
To update the microcontroller firmware:
to the server's [B ... - Connect a joystick to the interface's port
- Connect the interface to a USB ... port of the server
- Hold the joystick to ... -
Interface 1 bisOk, well the postmans just been and brought with him my new arrival, the Interface 1 bis. So as promised I thought I'd share some initial usage exper…
... BRA TIM_50 ; Set time-out to 50ms
[/FONT]
Connect a joystick to the interface's port
- Connect the interface to a USB ... port of the server
- Hold the joystick to ... be still contrary to the manufacturer's ... -
How to test Z80 Code?Hi All, Is there a way to test a block of z80 code (nothing speccy specific in it) with many different inputs? The reason I ask is that I'm writing…
... ] writing 4 lines of text to a file for each run ... writing the text file back to the USB. So, each run through ... .
FYI - The base PC runs an AMD Phenom II ... -
The new xbox...I hope the launch of the new xbox (6pm BST today!!) blows the dismal PS4 launch into orbit!! I'm not sure if I'm getting excited or not. I still rem…
... two years time (forcing people to upgrade)
this means ... the xbox one can't connect to the internet servers and will ... , as PS 4 or a PC when that happens. -
The new xbox...I hope the launch of the new xbox (6pm BST today!!) blows the dismal PS4 launch into orbit!! I'm not sure if I'm getting excited or not. I still rem…
... Xbox One can't connect to the Internet after a ... be just gaming on the PC. So, no it's ... behind, comparable in performance to the 360 and PS3. ... is that the improvements to Kinect will make publishers ... everything, there's nothing to beat a modern PC.
The new xbox...I hope the launch of the new xbox (6pm BST today!!) blows the dismal PS4 launch into orbit!! I'm not sure if I'm getting excited or not. I still rem…
... ;). But the below reasons apply to PC as well.
2) ... on my TV stand to accomodate a PC cabinet.
PC next to the TV or do ... br /> Google "mini itx gaming pc" and that will give you ... cable you can easily connect it to the main TV as ...The new xbox...I hope the launch of the new xbox (6pm BST today!!) blows the dismal PS4 launch into orbit!! I'm not sure if I'm getting excited or not. I still rem…
... ;). But the below reasons apply to PC as well.
2) ... on my TV stand to accomodate a PC cabinet.
PC next to the TV or do ... wireless keyboard/mouse/joystick/usb network adapter on both ...
Both PC cabinets sit on the floor ...Interface 1 bisOk, well the postmans just been and brought with him my new arrival, the Interface 1 bis. So as promised I thought I'd share some initial usage exper…
... card inserted, USB cable attached to IF1bis and connected to laptop at other ... is powered up, IF1Bis switched to on - inactive, and then ... , as when I try to connect to a powered USB hub (which has an ... LED light to confirm when ...Migrating OS to SSDIve been thinking of getting a 120g SSD drive for my pc and migrating the OS (Win7 64bit) to it and just having the OS on it, nothing else (Got 1.5TB…
... for my pc and migrating the OS (Win7 64bit) to it ... nearly full terrabyte HDD to a USB HDD to decrease the used ... and then cloned it to the SDD using EaseUS ... After that I also 'needed' to align the sectors.
< ... files back from the USB HDD and then created ...Fable III free on Xbox.com at presentIf you're an Xbox Live Gold member, you can grab Fable III for nowt at present. On xbox.com it says ?29.99, but click the option to pay with Microso…
... to a USB stick can I back it up onto my PC to ... prevent having to ... guy at the local PC shop to remove the screws so ... br />
May have to renew the 1 month free ... subscription then to get the free downloads ...My FrankenspectrumHey all, I originally posted this on the Raspberry Pi forums, but thought people here might be interested also. Inspired by the guy on Flickr who m…
The first tests go well, I got a usb keyboard, I am left with the controller, I welded wire each input and output, and collecting random wires, leaving letters and numbers .... now the next step is to connect to the membrane of +3 and keep tryingA new site for an old projectThe 'Interface 1bis' project site has been moved to: [url]https://sites.google.com/site/interface1bis/[/url] In fact, it's not only a simple relocati…
... Farrow's excellent SPECTRA interfaces to connect to a small LCD screen with ... get the IF1bis to communicate with a PC using Windows XP ... me!) how to transfer files from the PC to the SD card ... (and how to designate which folder to transfer to ...New Software for iPhone: Speccy TapeHi, I've just got the message from Apple that it has been accepted so..... Speccy Tape is a simple utility that converts your device into cassette…
... I just go to file browsere or connect it via USB. if Apple ... like me cannot transfer files to it or from it (without ... ? You surely won't want to see how my bashing looks ... Apple products are not supposed to work in expected way (except ...New audio interfaces.I heard that gasman and someone else had to release two new input interfaces for spectrum+AY : a theremin interface and something else I can't rememb…
... AY chips are probably easier to get hold of than the ... like early sound-cards for PC, with some wave-table ... you connect this interface to the zx bus, how could you connect to ... games/demos even on PC/Atari ST/MAC and ... basing it on some old PC cards (that were old ...Connect spectrum to monitorHello, Probably a stupid question but I'll ask it anyway :) Is there a way to connect a spectrum to a vga or dvi monitor? Thanks, Ant?nio
... :) Is there a way to connect a spectrum to a vga or dvi ... -Composite-S-video-VGA-In-to-PC-VGA-LCD-Out-Converter-Adapter ...
