-
replacement +3 psuok, who would be kind enough to help an idiot build a replacement PSU for the +3 / +2a , from a PC power supply? Guesser has already helped out a gr…
[QUOTE=DEATH]One more thing to add: Make sure you get ... looked at". When you come to wire the plug, you'll ... of it. so you need to reverse the pin numbering. Confusing ... 5V line (that's NOT 2A to each pin btw, it's ... could say i value the +3 at nothing at the mo ... -
Multiface for Spectrum 48k/+Wanted: Multiface for a Speccy 48k or +. Anyone willing to let one go for a fair price?
... all Speccies except the black +2a and +3
What do ... one for? If you want to use the back up facility ... same job (only save is to disk obviously). There are bits ... -
Questions from the new owner of a grey Spectrum +2I managed to pick up a grey Spectrum +2 off of ebay with cheap shipping (I'm in the US... it was $13 total and it has a Donkey Kong tape inside) and …
... t get the damn cable to work. I think I ... , so I'm going to rebuild my adaptor from scratch ... modem connection for either a +2a or +3, (grey +2 and 128 ... software I'm using to transfer stuff to my +2e, I ... software without any problems to control my Linux box. -
SCART Lead and C= 1940 MonitorHi, I've decided to make a SCART lead for my +3 I've been doing a lot of searching on the internet and forums but I'm a little confused as some peop…
... the cable is connected to a uninsulated conductor. Should ... Is it nessary to connect this to pin 21 on ... /> Works on +2A and +3 (slight buzz on +2A).
Half works ... another ground to connect to pin 4 (to save me ... shouldn't be connected to the other grounds. ... -
Anyone have any pics of their collection?I'm an Atari 800XL owner and the main media that games were on for that were tape. Trouble is I've seen loads of pics on the net of peoples collectio…
Noob to Z80 needing +3 helpI'm quite new to z80 programming, but i'm attempting to write some kind of windowing system that will run alongside BASIC on my +3 with Kempston mous…
... which requires me to manually page in ROM 3 and RAM 0 ... I don't know about +3 specifics, but Sinclair basic ... used z88dk (preferably with the +3, although info on the 128k ... portions working and then progressively convert over to assembler -- z88dk allows mixing ...DivIDE and RWAP's DiwIDE*Opps, sorry, wrong forum, this thread must be in hardware topic.* I was planning to get a divide from Rwap, but I'm too afraid of long way the devi…
... have a +3 to try so have to take your word ... to not work on +3 anyway ? There is no difference between +2A and +3 ... when it comes to HW and ... special jumper for +2A/+3 on Divide to make it work ... if people want to be able to program in ...DivIDE and RWAP's DiwIDE*Opps, sorry, wrong forum, this thread must be in hardware topic.* I was planning to get a divide from Rwap, but I'm too afraid of long way the devi…
... to not work on +3 anyway ? There is no difference between +2A and +3 ... when it comes to HW and ROM ... a special jumper for +2A/+3 on Divide to make it work there ... mode the 128k snapshots fail to load. FATware handles 128k snapshots ...Cool BASIC tricks and tips!Following on from Dunny's excellent suggestion of a compendium of BASIC tips + tricks, I believe it would be better to have a topic dedicated to it. …
... spanish magazine microhobby. I have to start reading them again.
2a and +3 machines.
[url ...Emulating Spectrum digitizer?Hello everyone, Not sure if this is the right forum part to ask this question...basically, I'm making a video for my brother's band (the song is cal…
... files Congrats! :)
Step 3 - VirtualDub (again)
- ... changed, use the option to change it to the original one again ... audio, now is the time to go to [B]audio > WAV ... then use Total video converter to convert it to .mov, .flv or xvid ...Cybernoid editorSo, my long tern goal is to make my own Cybernoid or Rex like game (see an ancient thread about Sprite advice)...but my skills are somewhat lacking..…
... when you PRINT text to the screen. It does ... " is 2, the # is 3 etc... following the character set ... br /> So by pointing CHARS to some other area of memory ... you can have up to 96 defineable characters as ... so you'll have to convert them to character (UDG, or 1x8 ...AV CableI have purchased an AV Cable for my Sega Mega Drive. Since it has a 5 Pin DIN connector, which fits into the 8 Pin DIN socket, I presume it will wor…
... the later ones are rewired to be RGB only). The Megadrive ... as it's not a +2A or +3).
The ... use different connectors and pins to output the signals to the TV.Features that emulators don't haveI believe most of us use more than one emulator, mainly because there isn't one emulator that has all the features we need or want to use. We also kn…
... this)
b) Convert data to Sinclair ASCII and transfer ... />
[quote]
3-When using the 48K Basic ... I would like to be able to edit any line ... type the line number to jump to, there's also ... 'm talking about being able to type numbers, / * - + and ....dsk and +3after successfully connecting 3,5" PC FDD as drive B: , i'd like to backup all my 3" disks from A: to B: as .dsk images on ZX+3 (not PC) All of them …
... I've managed to copy DU50 to +3 and format some ... which one is best for +3 ?)
Is ... me backup diskettes on +3? (and back to A: )
... it'll let you convert unprotected discs to .DSK files and ... you could format 3.5" discs to 173k and just ...Joypad QuestionIf I plug a joypad / joystick which uses the Atari 9 Pin connector into the Spectrum, will it work? For example, will a Master System / Mega Drive c…
It doesn't work in Amstrad ones. That is, Spectrum +2, +2A and +3 don't use Atari pinout in their joystick ports.
Fortunately, it is very cheap to make an adapter.Printers for Spectrum +2 and +3It seems that the only printers availables for ZX Spectrum were ZX printers and compatibles (connected through the expansion bus), but Spectrum +2 an…
... widely supported. Although the +2A and +3 have centronics ports, they ... need a bit of tweaking to work with real centronics. ... supplied with +3 BASIC, they are unsupported to the best of ... should be relatively straightforward to adapt it to RS232.[/QUOTE]
...Compatibility problems in Bomb Jack with Spectrum+2A??I recently bought Bombjack for the Spectrum, cos its one of my favs, but when I load it on my +2A, the game resets when its going to start, I mean, t…
... will play OK on +2A or +3. You can get it from ... emulator (Spectaculator, Spin), record audio to tape and then load on ...Compatibility problems in Bomb Jack with Spectrum+2A??I recently bought Bombjack for the Spectrum, cos its one of my favs, but when I load it on my +2A, the game resets when its going to start, I mean, t…
... will play OK on +2A or +3. You can get it from ... emulator (Spectaculator, Spin), record audio to tape and then load on ... /> Thanks man, but I want to load it on my real ...Running code from the display memory?Is it possible to run machine code from the memory area used by the display file? If you were really out of memory and some part of screen is not u…
... contention when running on a +2A/+3.[/quote]
I don't ... is correct, then even if +3's opcodes has less contention ... average 128k can be equal to +3.
Some real test would ...Cannon BubbleHello! I would really like to transffer this game ( [url]http://cezgs.computeremuzone.com/eng/card.php?id=14[/url] ) to my REAL +3 disk drive. Becau…
... Realspec, and convert the normal TZX version to cassette tape, ... that into your +3 or a tape to disk utility?[/QUOTE ... ]
Tape to disk utilities can not transfer ... but I want to save it to +3 disk that I don ... 't need to do ...Making your own joystick interfaceJust spied the diagram for the kempston joystick interface in the docs section. For someone who has only made up cables, what is involved in constru…
... the case and solder directly to the bottom of the ... ribbons are unplugged before soldering to the board as they can ... ok for 48k to +2, but not for +2A,+2B,+3 (built in ... other:
i refer to the pins in this order ... 1 : 2
2 : 3
3 : 5
4 : 2
Kempston printer interfaceHi all, I won an Kempston Printer Interface from eBay and I am awating the arrival of it. At present I got hold of a Spectrum Plus2B today working or…
... the original poster to plug this in than to get hold of ... a +2 to Centronics cable, assuming that the ... not gonna work on a +2a/b 3.
So, assuming ... it's not going to work, he ...Transfer to tape from PCHi all, A few years ago I had a program on the Amiga that would take a Spectrum game and save it out via the serial port to a cassette tape player. T…
Here's my solution:
1. Take a .TZX file
2. Convert it to WAV
3. Burn it to a CD
4. Copy it to tape
5. Play, et voil?!
It works with me 9 times out of 10.Transfer to tape from PCHi all, A few years ago I had a program on the Amiga that would take a Spectrum game and save it out via the serial port to a cassette tape player. T…
... />
2. Convert it to WAV
3. Burn it to a CD ...
4. Copy it to tape ... that it also works to convert the WAV's to MP3....at least ...Eprom blowerdoes anyone know a site with plans for an eprom programmer project that'll blow 27C256s. I attempted to build one called Kisseprom, but the software …
... at least two different mods to get them working. One involved ... .
Both the 2a and 3 use Eproms as well as ... use them, with no difference to board that use Proms instead ...Parts & RepairsHi, For those who may not have been following other recent threads, I was recently handed a huge[1] box of ICs, for a wide variety of 8-bit machines…
... to test out.
Do you have 4 of those +2A/B /+3 ...ZX Spectrum Power Cable on +2AHi, Today I bought a +2A, but it is lacking a power cable. I rooted around and found one, but it is for an ordinary ZX Spectrum. Will it work? This…
... ,
Today I bought a +2A, but it is lacking a ... the Amstrad machines (+2 +2A and +3) have a din plug connector ...
if you need to ... is a standard type, easy to get hold ofBest 128k model to add CF IDE disk etcHi, i'm hoping to turn one of my speccys into more of a 'console' the plan is i'd like loads of speect games installed say on a compact flash card …
... like to use a grey +2, but i see the +2a and +3 ... be a better bet, due to a higher compatibility with most ... software - the +3 based hardware had some major changes to various parts ...RGB cable problemI bought an RGB cable from a Polish dealer on Ebay for my Spectrum 128+, but I can only get an AV signal from it. I sent it back to him and he gave m…
... leave the seller a negative to warn the others, as ... sure if I replied to your message. I don ... one for +2A/+2B/+3
I need to obtain a ... couple of other Spectrums to ... design, (and so as to avoid the problems as described ...Bubble Bobble EditI thought I might have a go at editing Bubble Bobble myself after reading this... [url]http://www.worldofspectrum.org/forums/showthread.php?t=15452[…
>>>>>> [url]http://www.j-one.co.uk/mulder/BBE_v2_0.tap.zip[/url]
