-
+3e with DivIDE systemsIf we replace old R-GAL chip on original DivIDE with new XR-GAL (this is only firmware for GAL chip) then will possible DISABLE or ENABLE any DivIDE …
... DISABLE or ENABLE any DivIDE system running in mapram ... />
This routine reset DIVIDE paging port and disable system ... full usable DivIDE system with 48rom and enable 128kB memory.
... GAL version used in original DivIDE interface. Firmware is here ... -
DivIDE hardware problem...Hi Have a DivIDE on my +3e In +3e (flash upgrade) mode it's fine, however in DivIDE mode it is not... FATWare shows the logo then just sits there …
... a DivIDE on my +3e
In +3e (flash upgrade) mode ... it's fine, however in DivIDE mode it ... -
Divide kind of working - could do with some helpHello all. Sorry for asking what might be things which have already been discussed, I did try and search honest gov... So, have a 128 toast rack (th…
... toast rack (thanks si) and divide c plugged in via ram ... /> It's on 12c should upgrade bios
Should it load ... -
How to create .TAP that loads into high memory banks?I want to create a program that uses the extended 128k memory, the banks that can be switched into the 0xc000-0xffff area. For the simple stuff I've…
... that uses the extended 128k memory, the banks that can be ... autostarts nicely when loaded from DivIDE (or emulator).
Now ... -
Where can I get a DivIDE interface for my speccy?I keep using my pc to play back the tape images I have for the spectrum. But it would be nice to have a DivIDE interface so I could load the games fr…
... a DivIDE interface so I could load the games from memory card ... -
DivIDE Plus - Upgraded GALs now availableAt long last, the set of upgraded GALs is now available for the DivIDE Plus, which improve stability and also re-writes the memory addressing, so tha…
... the DivIDE Plus, which improve stability and also re-writes the memory ... -
divIDE firmware questionsRecently got my divIDE up and running - and it's pretty sweet, actually :) Even so, I have been seeing the word "esxdos" pop up quite a bit and I kn…
... other firmwares available for the divIDE so I'm basically ... the divIDE if I do something wrong?
if I upgrade to ... posting questions about the +3e upgrade, Zetr0's IDE thing (which ... attention is grabbed by the divIDE and the possibility (and benefits ... -
2013 projects: new PlusD, DivIDE and MultifaceI have written about this before, but as I want to let these project be influenced by your opinions, I thought to create a separate topic about it. …
... )[/URL].
[B]New DivIDE[/B]
After ordering the ... will focus on a new DivIDE, codename 'DivIDE 2013'.
This will ... cheaper products and a technology upgrade so that deprecated parts will ... -
August sales[COLOR="Blue"]I have about everything listed here in stock. But some of it must be made ready (with custom wishes). [B]Buying directly will save you…
... hobby/vanmezelf/sales/divide.jpg[/IMG]
[B]DivIDE black edition[/ ... IMG]
[B]Opus Discovery upgrade packages[/B]: (more info [ ... issue 6 and 128K model memory logic)[/B]:
- ?10 / ... - Are 100% compatible with the DivIDE
- Have all rubber feet ... -
Ben Versteeg's September sales[COLOR="Blue"][B][SIZE="6"]Add-ons[/SIZE][/B][/COLOR] [IMG]http://benophetinternet.nl/hobby/vanmezelf/sales/line.jpg[/IMG] [IMG]http://benophetinter…
... B]Brand new DivIDE black edition[/B]
- DivIDE with 1GB card ...
[B]Opus Discovery upgrade packages[/B]
- 6116 ram ... - Are 100% compatible with the DivIDE
- Have all rubber ... - SD card
- More memory (128KB/512KB)
- New hardware ... -
Copying data between memory banks in USR0 modeI am experimenting with Funky Fungus to load the majority of its data (levels, screens, music etc.) into memory banks 1, 3, 4, 6 and (partly) 7 by sw…
... , screens, music etc.) into memory banks 1, 3, 4, ... and above, I need memory bank 0 to be ... program to run with the DivIDE, which employs USR0 mode ... only run with the DivIDE by using Velesoft's ... I understand loading data into memory banks is easier because all ... -
Upper RAM replacement module issues with the DivideI got my new upper ram replacement module from Zorn yesterday and seem to be having some issues. When the machine is without the Divide it boots up …
... machine is without the Divide it boots up fine ... I have the Divide on it (original divide), issues start to ... area. Other times the divide fails to initialize the CF ... the ram passes the memory test i perform with the ... reseting it) having a divide on, I would be ... -
Ben Versteeg's November sales[COLOR="Blue"][B][SIZE="6"]Almost ready[/SIZE][/B][/COLOR] [IMG]http://benophetinternet.nl/hobby/vanmezelf/sales/line.jpg[/IMG] [IMG]http://benophet…
... /> - SD card
- More memory (128KB/512KB)
- New hardware ... />
[B]Opus Discovery upgrade packages[/B]
- 6116 ram ... issue 6 and 128K model memory logic)[/B]
?10 / ... - Are 100% compatible with the DivIDE
- Have all rubber feet ... -
What CF Card For your DIVideI recently purchased a DIVide with a 4gb CF Card [IMG]https://www.bechtle.co.uk/medias/200x200/200x200-EcsHUb93uHc6x9N9CBYV58-30.jpg[/IMG] and have…
I recently purchased a DIVide with a 4gb CF Card< ... Extreme 400X Compact Flash CF Memory Card
[IMG]http ... -
RTC module for DIVIDE[IMG]http://velesoft.speccy.cz/other/rtc_module_v01_full_top.jpg[/IMG] [IMG]http://velesoft.speccy.cz/other/rtc_module_v01_full_bottom.jpg[/IMG] [IMG…
... br /> RTC module is small divide upgrade with RTC chip. System ESXDOS ... designed specially for original DIVIDE interface and DIVIDE 57d2 or 57d3. ... br />
Installation to DIVIDE:
1) remove MGAL and ... chips from sockets on your DIVIDE interface
2) ... -
Converting a 16K speccy in +3??Yes, you heard right. A new interface to convert a 16Kb speccy into a Spectrum+3 have been developed. [IMG]https://lh6.googleusercontent.com/N2eAoz5…
... /> - 128/256/512Kb de RAM upgrade. Selectable by jumpers
- 2 ... /> - NMI button
- 512Kb flash memory containing until 32 different ROMs ... /> - Expansion for the bus.
- divIDE compatible
- Add-on to ... -
Spectrum Ram UpgradeHi, I am looking to upgrade my 16K Spectrum to 48K. I have some 41256 dram chips from an old QL memory expansion, can the Spectrum us the large…
... />
I am looking to upgrade my 16K Spectrum to 48K ... chips from an old QL memory expansion, can the Spectrum us ... -
DIVMMC interface versus DIVIDE interfaceDIVMMC/PICODIVSD/DIVSDNANO is one same device with identical CPLD chip and same memory/features. DIVMMC use 8kB of eeprom with code for boot system f…
... 40kB. Memory paging is copy of old version of DIVIDE interface. Yes ... , only copy of old version = support only easy memory ... to IDE). Memory mapping is identical with DIVMMC. Divide support also true ... -
DIVMMC / DIVIDE and combination with next interfaces (compatibility)Very often we can read about problems of ports collision or incompatibility between devices. Here is way for identify devices compatible/usable with …
... DIVIDE and erase from table all other devices with external memory ... throught bus connector, because DIVIDE and DIVMMC is possible connect ... contain only interfaces without memory, removed ports of some ... memory based devices are on begin of ports table - DIVIDE ... -
Fuse 1.4.1 releasedA new release of Fuse, the Free Unix Spectrum Emulator, is now available at the SourceForge project: https://sourceforge.net/projects/fuse-emulato…
...
[*] Set contention for DivIDE/DivMMC EPROM memory and clear data to ... selectors
[/list]
Upgrade to libspectrum 1.4.1 ... -
divIDE interface not workingA while ago I bought a divIDE interface for my two spectrums (one is a 48k rubber keyboard one, the other is a 48k Spectrum plus). Sadly I never actu…
... ago I bought a divIDE interface for my two ... />
This is the divIDE interface that I bought: http ... ://divide.cz/index.php?y ... have issues with the divIDE. Both of my Spectrums ... were already on the memory card). Not to mention ... -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... futire will work with my divIDE).[/QUOTE]
... with divIDE Plus. The standard divIDE doesn't have enough onboard memory ( ... in conjunction with a cutdown (memory-only) ZXMMC+ or ZXCF+ ... an alternative, rather than an upgrade.
[QUOTE] ... -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... would love to offer an upgrade option on my website ... for users wanting to upgrade from an original DivIDE to a version ... OK, I can complette MB02 upgrade interface (final version with 512kB ... is 100% compatible with MB02+ memory paging (512kB version without rom ... -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... ]OK, I can complette MB02 upgrade interface (final version with 512kB ... is 100% compatible with MB02+ memory paging (512kB version without rom ... be perfect for divIDE users who want to upgrade and use ResiDOS ... -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... would love to offer an upgrade option on my website ... users wanting to upgrade from an original DivIDE to a version ... virtually identical to the existing divIDE Plus version (the only ... version for the original divIDE with this memory board upgrade would be just ... -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... identical to the existing divIDE Plus version (the only ... for the original divIDE with this memory board upgrade would be just ... good news indeed the memory board upgrade looks an ideal solution ... , will have existing DivIDE users flocking to purchase the upgrade. -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... be perfect for divIDE users who want to upgrade and use ResiDOS ... install RESIDOS to any MB02+ memory page and set manual maximum ... -
FAST and SLOW .TAP loading in RESIDOSWhy is in RESIDOS this TAP file loaded always too slow ? (with lines in border area). Other TAP files on my drive is fast loaded, but loading this fi…
... in ROM area disconnect external memory and use original ZX rom ... ). Reset button is ignored (my Divide upgrade not use reset of MB02 ... at begin of all RESIDOS memory pages insert switch to correct ... -
FAST and SLOW .TAP loading in RESIDOSWhy is in RESIDOS this TAP file loaded always too slow ? (with lines in border area). Other TAP files on my drive is fast loaded, but loading this fi…
... in ROM area disconnect external memory and use original ZX rom ... ). Reset button is ignored (my Divide upgrade not use reset of MB02 ... at begin of all RESIDOS memory pages insert switch to correct ... -
Suggestions for Mr. Rich MellorRich, is there a chance any of these things could be available from you in a near future? -AY interface for 16K/48K Spectrums -PS/2 keyboard interfa…
... pin cables
-Services to upgrade Spectrums (rom replacement (would also ... ear port to Amstrad Spectrums, upgrade to +3e, etc.)
... (sound fix on +3, memory replacement, ula replacement, hardware fix ... .
[IMG]http://www.divide.cz/pic/n_bus.jpg[/IMG ...
