-
ZX Spectrum +2A and +2B - finding the true factsI'm confused. Some told me that a +2A has a +3 board, and the +2B got the simplified board. But I think that is not true. I have had over a dozen b…
... an external drive, called the FD-1, although it was primarily designed ... -
ZX Spectrum +2A and +2B - finding the true factsI'm confused. Some told me that a +2A has a +3 board, and the +2B got the simplified board. But I think that is not true. I have had over a dozen b…
... should use the model AMSTRAD FD-1 drive(s) together with a ... suitable interface (the AMSTRAD SI-1 when available, or other manufacturer ... 's equivalent). The SI-1 interface connects to the EXPANSION ... will support up to two FD-1 drives.
[/quote]
< ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... 'm intending to connect the FD-1 to an old pc to ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... the drive powers the DDI-1 so presumably you have to ... pinouts or schematics for the FD-1. The cable wiring for the ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... +3)
The FD-1 has both drive select lines ... connector you will short the FD-1's power supply to ... the ribbon cable at the FD-1 end, or cut the ... tracks inside the FD-1 if I never intended ... a small board inside the FD-1 that interfaces the 34 ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... the drive powers the DDI-1 so presumably you have to ... pinouts or schematics for the FD-1. The cable wiring for the ... of both the FD-1 and the FD-2 drives (The FD-2 is ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... of both the FD-1 and the FD-2 drives (The FD-2 is ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... />
So... to connect the FD-1 drive to the +3 I ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... />
So... to connect the FD-1 drive to the +3 I ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... I need to connect an FD-1 drive externally to the +3 ... -
Amstrad FD-1 Disc DrivesA quick question: With the Amstrad FD-1 external disc drives, I've seen DDI-1 interface cards mentioned. Are the DDI-1 interfaces just for the Amstr…
... I need to connect an FD-1 drive externally to the +3 ... -
A "generic" loader for +3(e)I've made this loader for 128k games in +3DOS. [CODE]dos_open equ 262 dos_close equ 265 dos_abandon equ 268 dos_read equ 274 dos_write equ 277 dos_s…
... +3 disk by using an FD-1 drive connected to an old ... -
Transferring soft from PC to +3?Hi. A friend of mine has bought the +3 after longer break in Spectrum using. Which is good. He would like, however, to use it with real 3" diskette…
... FD-1 / DDI-1 external 3" disk drive, disconnected one plug inside the FD-1 ... has the option of 5 1/4" drives. -
What causes "The disk has been changed" problem on a +3?I've seen this posted here on this forum and no explanation as to what causes it or any solution that doesn't involve writing a DSK image back to the…
... the one in my external FD-1 and get the exact ... the "Disk has been changed, 1:5" message, select +3 ... BASIC and type 'run 1' the disk actually loads and ... instruction' which points to line 1 (Live Ammo) or 10 ( ... />
Side B:
1 BORDER 0: PAPER 0: INK ... -
Mastertronic Compilation Disks 1,2,3As part of my +3 resurrection I came across some Mastertronic compilation disks that MAY be MIA: +3 Compilation Disk 1 Side A Finders Keepers S.O.S.…
... /> I have now got an FD-1 and have dumped all Disks ... DSK format using samdisk! Disks 1, 2 & 4 dumped without ... has Side A dumped but 1 game fails to load due ... /> Where do I submit Disks 1, 2 & 4 if they ... -
z88dk terminalsto set up a terminal a bunch of numbers are needed: m4_zx_01_output_fzx(_window_1, 0x2330, 0, 0, 1, 14, 1, 19, 0, _ff_ao_Prefect, 14, 0, 14, 8, 1…
... />
[code]
;# fd=1, window_1
EXTERN _ff_ao_Prefect ... dnl## $1 = label attached to FILE or 0 if fd only ... 19 = line spacing (0 = single, 1 = 1.5, 2 = double) ##
... b]$1 = label attached to FILE or 0 if fd only[/ ... -
z88dk terminalsto set up a terminal a bunch of numbers are needed: m4_zx_01_output_fzx(_window_1, 0x2330, 0, 0, 1, 14, 1, 19, 0, _ff_ao_Prefect, 14, 0, 14, 8, 1…
... include
ioctl(1, IOCTL_OTERM_CLS); // cls window and set ... text
ioctl(1, IOCTL_OTERM_PAUSE, 1); // enable pause when ... is filled
ioctl(1, IOCTL_OTERM_FONT, ff_ao_SoixanteQuatre); // change ... is attached to fd=1 depends on your ... -
z88dk terminalsto set up a terminal a bunch of numbers are needed: m4_zx_01_output_fzx(_window_1, 0x2330, 0, 0, 1, 14, 1, 19, 0, _ff_ao_Prefect, 14, 0, 14, 8, 1…
... input terminal is connected to fd=1 ("__i_fcntl_fdstruct_1")
;# fd=1, window_1
EXTERN ... CRT_OTERM_FZX_SPACE_EXPAND)dnl
;# fd=2, window_2
... -
What causes "The disk has been changed" problem on a +3?I've seen this posted here on this forum and no explanation as to what causes it or any solution that doesn't involve writing a DSK image back to the…
... drive as both my external FD-1 drives read them no problem ... -
What causes "The disk has been changed" problem on a +3?I've seen this posted here on this forum and no explanation as to what causes it or any solution that doesn't involve writing a DSK image back to the…
You attach the FD-1 to the Kryoflux's FDD ... , you have to open the FD-1 and disconnect the 2 pin ... -
New WoS quiz. Name that power supply!Can anybody tell what this power supply unit is from? It's heavily engineered and was way to OTT for the use it was used for. It was used to power th…
... me with a Teac 5"1/4 floppy drive, which had ... added onto a Amstrad DDI-1/FD-1 interface, to used as drive ... -
Backing up games on 3-inch disketteHi everyone, I recently acquired a copy of Outrun on 3-inch disk, which means I can now play one of favourite games (no criticism of my taste, ple…
... off is attaching an external FD-1 to an old PC with ... a 3" disk with an FD-1. The downside is you must ... own a Kryoflux and an FD-1, again even less user friendly ... -
What floppy disk drive system do you own AND use on your ZX Spectrum or compatible computer?What floppy disk drive system do you own AND use on your ZX Spectrum or compatible computer? By use, I mean you actually use it regularly (more th…
I use my +3 with both internal 3 inch drive, and sometimes with external 3.5 inch dive(B). I have also the Amstrad DDI/FD-1 setup for my 464 which is compatible with the +3, but not had need to use it yet with the +3. -
Req: Tintin on the Moon Kryoflux dump to repair my original disk!!Obtained a copy of Tintin on the Moon but the disk has been completely formatted and needs repairing!! Have the DSK image and created Kryoflux stream…
... real Floppy Controller and Amstrad FD-1 you can write those DSK ... have a KF and an FD-1 you can write the steams ... -
Req: Tintin on the Moon Kryoflux dump to repair my original disk!!Obtained a copy of Tintin on the Moon but the disk has been completely formatted and needs repairing!! Have the DSK image and created Kryoflux stream…
... !!
I have 2 FD-1 drives I use with my ... PSU (not needed with an FD-1) I use an external one ... !
Never connected an FD-1 to a PC so JFGI :) -
MERCS +3 DiskAnyone have a nice copy of MERCS for the +3 to sell, I'm in the UK!
Sorry I don't have a Kryoflux. Can make a disk image with SAMdisk and a Amstrad FD-1 though. -
New Utility to Transfer Z80 Snapshot to +3 DiskSince getting a Gotek for my +3 it has been my go to machine. The biggest downside however is the lack of older games on disk format with pretty much…
... way is using an Amstrad FD-1 connected to a PC with ... " which needs to become "jsw.1" (do this first with MOVE ... "jsw.0" TO "jsw.1")
Once this is ... -
iXpectum 1.2 HD (iPad enabled) is out!iXpectrum now supports iPad on jailbroken devices ;) Thanks to Ryosaebaa for his support... You can download by now at: [url]http://code.google.co…
... ]
changes (over iXpectrum 1.1):
- Added iPad HD ... missing undocumented instruccions with DD/FD CB prefix (LDr,(instruction) type ... -
Keys in 48k mode for SpecEmu 1.2?Hello all, Does anyone know how to get the " symbol to appear when in 48k mode on Spec Emu 1.2? As you can imagine, it's pretty essential to be able…
... 48k mode on Spec Emu 1.2? As you can imagine ... -
Interface 1Hi, Just got myself an Interface 1 only to find it does not work. That is to say that I can't use any of the extended commands on it,e.g. CAT 1, LOA…
... /> Just got myself an Interface 1 only to find it does ... it,e.g. CAT 1, LOAD *"m";1;"example".....
I ... Spectrum and not the interface 1?
Thanks
