-
RS232 - built-in vs. Interface 1Hello all. After some advice, and I figured someone here would probably be able to help. I'm the owner of a (grey case) Spectrum +2, and I'm keen …
... in 'RS232' port and the ZX Interface 1 'RS232' port don ... />
And despite the ZX Interface 1 using a 9 ... Interface 1 'RS232' port will work when a +2 grey is in 128 ... ROM in the ZX Interface 1 containing the code ( ... with a +2 grey in 128 mode.
... -
If you had four roms...Just wondering if you were designing a Spectrum from scratch, and you used a 27512 EPROM, which would hold about 4 spectrum roms, what you would inst…
... of around 300 to 400ms, and load times similarly quick... There ... ROMs are out there? Seems Multiface ROM is similarly 8K, so ... of the virtual microdrive cartriges and the speed is pretty good ... disk system ROM over the Interface 1 rom?
I ask ... -
If you had four roms...Just wondering if you were designing a Spectrum from scratch, and you used a 27512 EPROM, which would hold about 4 spectrum roms, what you would inst…
... with full compatability with the 128 model, but that makes sense ... in a turbo switch, PC interface, etc, while still maintaining the ... it, and to add the other necessities such as the Interface 1 Rom ... even those that need an Interface 1 to operation. I can choose ... -
Microdrive logic flow.Hi all, I've finally gotten my hands on an Interface 1 and Microdrive to continue my project, and have been analyzing the Microdrive with a logic …
... until the cartridge is full ). and allows writing, including default write ... is 4.5 x 128 = 576 bytes. And possibly over 600K.
This works well, because CAT and Write functions only seem to ... " should work with the default Interface 1, won't be any slower ... -
Microdrive logic flow.Hi all, I've finally gotten my hands on an Interface 1 and Microdrive to continue my project, and have been analyzing the Microdrive with a logic …
... ~ 512K or 640K. And then to make an Interface 1 that can still ... 10 to 12 snapshots. (eg, Multiface snapshots ) rather than 2, which ... an "Interface1 Hard Disk Interface" for a standard Interface 1, that could be ... -
Microdrive logic flow.Hi all, I've finally gotten my hands on an Interface 1 and Microdrive to continue my project, and have been analyzing the Microdrive with a logic …
... would be a pain with Multiface files, which load about 4 ... intent is to build an interface-1 replacement chip that can work ... planning on using a microcontroller, and when the IO is detected ... commands available to the user, and the screens that provide information ... -
Were the full Sinclair Loki specs ever actually known?I was just curious. A lot was leaked to the media, but the exact specs seem different depending on source. Some say it could support up to 512x256 an…
... launch of the ZX Spectrum 128, I get the impression that ... have required considerable time, effort and money.
Was ... bother fitting the relevant resistor and on later issue boards, deleted ... with the design of the Interface 1. If you use the RS232 ... -
The latest build of Specemu?The latest version of Specemu (a fantastic emulator, BTW) I have is SpecEmu-3.1.b150912.zip, which is a year old now, but knowing Woody he's probably…
... .pub/woodywoodster/specemu/specemu-3.1.b170921.zip
... ]v3.1 build 17/9/21
-------------------
Fixed Multiface 128/3 ... . Woody wrote it yesterday and adapted SpecEmu to pass it ... tried all the other emulators and they all failed.
... -
More "What could have been"... The Z280.So in chasing up the Loki specs, I happened upon some parallel developments... And had Sinclair gotten to make the Loki, there could have been some i…
... , a new ROM and maybe a card-based Interface 1.
9 ... ). They could continue selling microdrives, and maybe ... even put a disk interface in there ... dumped it. Likewise the 128 owners also seemed to hate ... -
Paging for 64Kb of Video Ram??? What is the best way to page this?Hi all, I'm just putting together a concept card for a "Loki" style of video card, which supports shadow ( so it fits a normal Speccy ) and also t…
... be possible to assert ROMCS and have it readable too, as ... with the Interface 1 as well, since that's only 8K, and some ... for the 48, + or 128 model, and still maintain all of the ... Spectrum screen, the Loki screen and all the original Spectrum memory ... -
Which expansions can I attach to a +2A?I have several peripherals that I would like to connect to a +2A: an Interface 1 with Microdrive, a +D disk interface and kempston joystick interface…
... +2A: an Interface 1 with Microdrive, a +D disk interface and kempston joystick interfaces ... ...
Especially the if1 and the +d, since they are ... -
Does anynoe has an IF1 for sale?I've never seen one, here, and now I'm crazy to try a LAN of spectrums... [img]/__forums/images/smiles/icon_smile.gif[/img] Anyone ever tried it? If…
I've never seen one, here, and now I'm crazy to try a LAN of spectrums... [img]/__forums/images/smiles/icon_smile.gif[/img] Anyone ever tried it?
If anyone has an interface 1 for sale at a reasonable price, just contact me. -
Spectrum +2/+3 looking for a good home!I have a spectrum +2, +3, Multiface 128, hundred's of games (tapes & disks), magazines, cover tapes (All originals) looking for a good home. The stu…
... have a spectrum +2, +3, Multiface 128, hundred's of games (tapes ... is cluttering up my cupboard and seems a waste to throw ... across this site by accident and thought someone might find a ... -
new emulatorHi All. If you wish you can download/test/link to/betatest etc. my new emulator EmuZWin 2.0. It emulates S48 and S128 and works under all Windows 9x…
... br /> emulates S48 and S128 and works under all Windows ... interface with plugins is not yet finally
released and ... DOS, Interface I, II, Multiface, SamROM, CP/M and other ... additional hardware
and configurations ... -
Let a=val "1"I see some basic programs which use Let a=val "1" instead of let a=1 syntax. what is the difference between val "1" and 1? is it an effect of some …
I see some basic programs which use Let a=val "1" instead of let a=1 syntax.
what is the difference between val "1" and 1?
is it an effect of some compiler or converter?
just curious. -
Meetings last weekendSo what happened at the several meetings this weekend? In Urmond (Holland) we had a lot of hardware for sale. Some visitors rediscovered the Spectru…
... the Spectrum Profi Club. 1 ZXPC Interface sold and a lot of info ... -
Spectrum stuff for sale I am thinking of selling my three 48k Spectrums and Spectrum+ computer, together with a load of games, some utilities and books. The Spectrum+ is in…
... selling my three 48k Spectrums and Spectrum+ computer, together ... of games, some utilities and books. The Spectrum+ is ... around sleeve.
Interface 1 & 2 and one Microdrive unit ... dot matrix printer and Spectrum to printer interface.
Four ... -
Multiface 128 - change loading messageAny idea how I can change the default behavour of the multiface? When I use it to save games it always displays "M128 Loading". I'd lke to be able …
... the default behavour of the multiface? When I use it to ... -
Tons of Books!Loads of books, all in good condition. Anything you want email [email="hitlife@btinternet.com"]hitlife@btinternet.com[/email] with an offer. Trade wi…
... Sinclair ZX Spectrum: Microdrive and
Interface 1 Manual (Official/Sinclair)< ... br />
Make and Program Your Own Robots for ...
Handbook of Procedures and Functions for the BBC Micro ... )
Games and other Programs for the Acorn ... -
Networked GamesI was just having a look at a game called Overlord and it gives you the option play over a network by connecting to Spectrums through an ZX Interface…
... at a game called Overlord and it gives you the option ... to Spectrums through an ZX Interface 1....WOW!!!!!
Are there ... -
New ROMAlthough commenced in late November, it is only now in the last few hours of 2003 that the "Gosh Wonderful" ROM gw03.rom has attained a release state…
... packs a Renumber, Block Delete and Stream Lister into the spare ... space and the editor uses letter-by ... compatible with the ZX Printer and Interface 1.
Further details can ... -
How to load the "Cromwell at War" and "The Wars of the Roses" TZX filesHello The new TZX versions of the "Cromwell at War" and "The Wars of the Roses" available from the archives (and I take this opportunity to thank ho…
... the "Cromwell at War" and "The Wars of the ... available from the archives (and I take this opportunity to ... thank however found them and uploaded them, since for ... demo) are split into "side 1" and "side2" TZX files.
... to load "side2") and I have tried another ... -
Fuse for Mac OS X 0.6.2.1 releasedFuse for Mac OS X 0.6.2.1 and the Fuse 0.6.2 utilities are now available for download from the Fuse homepage <http://fuse-emulator.sourceforge.net…
... OS X 0.6.2.1 and the Fuse 0.6.2 ... /> A recently used snapshots list, and
The ability to reset ... -
Microdrive Mayhem!I'm wandering if anyone can help me. I recently acquired an Interface 1 plus a couple of Microdrives. But I can't get them to work properly. The Int…
...
I recently acquired an Interface 1 plus a couple of Microdrives ... work properly. The Interface 1 appears to work, and the extended Basic ... constant thing is the Interface 1 itself. That leads me ... worst case - can anyone repair Interface 1's?
... -
Comms?Hello, I'm new to the site. I've started getting back into the speccy after I stopped using the old girl back in 1996. Anyway, I've seen a lot of …
... on the other 8-bits, and was wondering what comms hardware ... and software was available for the ... for the interface 1 network? I own 5 of these and would get ... -
Inherited stuffI've recently inherited some Spectrum stuff (see list below), and I am now asking if anyone could estimate what it is worth and where I should sell i…
... br /> ZX Spectrum, Microdrive and Interface 1 manual
ZX Spectrum+, ... br /> + several game instructions and various printed manuals (some in ... 3 Sinclar ZX Spectrum (with Interface 1) (one box) (Norwegian ...
+ several adaptors and cables (I don't know ... -
IM 2 interrupts and smooth scrolling - easy peasy!Okay, been fiddling around with IM 2 and have actually mastered (I think) how to use IM 2! Now I run my game Ragnar Revival in IM2 and use HALT to sy…
... fiddling around with IM 2 and have actually mastered (I ... scrolling text) using HALT, and one without IM2 and HALT.
in a,(07Eh)
and 1
jr nz mainloop ;No ... off interrups
im 1 ;switch to IM 1 and enable
ei ... -
lots of speccy hardware software on offerHave the following available from "breakup" of my speccy system and peripherals Microdive with cable, numerous microdrive catridges plus manual Int…
... plus manual
Interface 1
Kempston E ... centronics interface to print from more 'grown ... compatible, also with kempston interface..on cassette...boxed as ... is the microdrive unit and interface 1, but obviously cannot give ... -
IM2 Machine Code Sprites Example Code Using Char Based SystemFurther to my earlier post, here are sprites running using char method with IM2 driving it Note, for 48k spectrum using TASM [code] ; ***********…
... off interrups
im 1 ;switch to IM 1 and enable
ei ... 0
DEFB 128, 0, 0, 0, 0, 1, 14,240
128,128,128, 64, 64
DEFB 64, 64,128,128,128, 0, 0 ...
DEFB 160, 0,128, 0,128, 0,195, 60
... -
ANN: Tipshop updated Monday, 30 August 2004Monday 30 August 2004 Finally got caught up on Tipshop updates - lots of good stuff The Italian Project, and assorted Real Life things have meant I…
... some useful POKEs for the 128 version of Art Studio
Impossible Mission 1 and Terminator 2: Judgement Day (AndyC ... 1, Moon Alert, Roller Coaster, Thunderbirds and Zynaps (Daren Pearcy);
Cybernoid 1 and ...
