... up to the same TV via another cable that I made ... [i]doesn’t show[/i] via the composite output! In fact ... video signal—no effect
3. Played around with the values ... the key. Playing sounds, both via the ULA and the AY ... suggestions and will appreciate any input.

... inactive peripherals after loading a snapshot
[*] Re-enable sound after phantom ... typist finishes loading TAP, standard ROM ... TZX or +3 DSK images ...

... ]
[*] Disable inactive peripherals after loading a snapshot (Sergio Baldoví).
[*] Re-enable sound after phantom typist finishes loading TAP, standard ROM ... TZX or +3 DSK images ...

... inside the shell and the sound was all over the ... I tested it with a +3 (I don't have a ... and then R Tape Loading Error as soon as the ... 's considerably lower tolerance for loading errors.

I ... recording a file from TZX2WAV via Audacity using a number ...

... You can even add a loading screen if you want, which ... found that swapping the +3 48k ROM with the original ... utility to use the +3 special mode which allows you ... get working on a +3, even via loading from tape in 48k ... games to one disk via tape in an emulator ...

... />
papAYa - an AY-3-8912 sound chip expansion board for the ... tracks I play require two sound chips, and taking two Spectrums ... make no difference to the sound. But if you take that ... at least need the actual sound chip.

Basically, I ...

... best I get 1/3 of the loading screen and then I ... get a loading error. The tape signal ... the game (on original hardware via tzx player or divide, ... 82, Pause=1005ms.
Block 3 => Bytes: Oure Hope - ... my wav file (it does sound good to me) and/or ...

... an appropriate input routine to $6000 and copies another loading screen onto ... the display
3. The main ... $F000 if the second loading screen is done away with ... replacing the music, which could sound a lot better using the ...

... your speccy via your Line Out port on your Sound Card ? Works ... in the house for about 3 years!(And wouldnt even know ... used by ATRAC fudged the loading tones. This would have been ...

... = "Position" mode ("P");
3 = "Setup" mode ("S").
... clears for you to input your commands. You ... it I've made it sound!)

... /> "B" + "1", "2", "3" = "Blitz", "Balance" and "Beginner";< ... />

Loading/saving:
(I'm not ...

... [/url]

[3] Connect your spectrum's loading lead to your ... of course just record the loading sound generated by winamp onto cassette ... the game onto your spectrum via tape!

... />
[quote]

3) Ability to enter cheat codes ... rendering systems, sound effects enhancements)

3. Basically needed ... saving, tzx/tap/wav/csw loading etc)

... Thanks for using SPIN, your input is extremely valuable!
...

... z80 to tzx thing. its 3:18 am and i have ... - i emailed you about the loading screen. i removed the NOSPAM ... anyway. just want your some input from you if it's ... in our abbey, brother" ... might sound better?

if not ...

... available via remote control. I use TAPER to play the sound into ... audio tapes.
The minijack loading input of the Spectrum is a ...

... had NO success at all loading into the EAR socket of ... using a MONO>MONO 3.5mm jack lead, but ... br />
Thanks for your input though, and I`ll post ... not getting a loud enough sound is because you are ... mono adapter once and the sound was too quiet. That' ...

... you end up with 3 or four pointers on ... at the end of loading and the game freezes ... it is loading normally. But problems with AY sound, I'll ... used strong port reconision for input (FFFD, but the Robocop ... last save, while for loading games it brings you ...

... is mapped to 1, 2, 3, 4, 5 (same), ... the MIC connection (bit 3) and can be used ... and 0).

* LOADing from tape
-------------------

3. This would not work ... most apparent during an INPUT statement. The value is ...

... /3. It was slow, buggy, 48K only and there was no sound ... , but the thrill of loading in my games via my ...

... .

- 3. Save and load ---------------------------------------------
... keys
active in data input:

EXT ... you can send voteform via
snail ... 3" logo,
Jeffie - technical works,
Black Fox - intro sound ...

... earlier versions).
[-] Loading from ZIPs, containing several ... after loading the file (if success).
[*] Better sound ... sound to WAVE provided via SaveWave plugin.
[+] Saving sound to MP3 provided via ... , such as MPEG Layer-3 or LAME MP3).
...

... on the net and newsgroups (via google.com), but I can ... possible, do not get a +3 or a +2A. These ... the +3 (don't know about the +2A) has corrupt sound. The ... know to solder a tape input connection into the case, so ... , but the +2 (and +3 and +2A)'s joystick ports ...

... since i've started loading speccys games off my ... inside of the RF input, an quite frankly i ...
finally.... the dreaded +3.

i had ... -crap-+3-AY3-fitting... although the whole sound is ... ro/html/plus3_hardware.html#sound]here[/url] about fixing ...

...
2) heaps
3) huffman codec
4) linked ... lim2".

{z88dk}/include/input.h and {z88dk}/include/spectrum ... a binary file ready for loading into the Spectrum. Unfortunately, ... rather than directly to the sound chip.

Data ...

... Spectrum end will short the INPUT to the Speccy - exactly the ... to use! To load via the TAPE/SOUND socket, you must use ... the PDF :-)

My +3 loads fine from the computer ...

... , beside colours) compared to issue 3 and later?

I ... seem to change with the sound when playing a game for ... an impedence bump to the input of the modulator. It's ... to go into the modulator via your resistor/ferrite bead. This ...

... to VGND (virtual ground) pin #3.

[/QUOTE]
loading games using this one or ... , is the sensitivity of the input.

[URL ... for adding the channels via R1 and R2 in ... solution could be a 3-way switch, where you ...

... . The PLAY is an INPUT connection and connects to the ... jack leads - one 3.5mm to 3.5mm, the other 2 ... .5mm to 3.5mm jack. The 3.5mm to 3.5mm jack ... and slowly increase it until loading is reliable. Don't ... .

That "fluffy" sound you hear when there's ...

... a hard drive, built in 3.5" floppy drive etc.
3 has a "Gate Array". Only ... source is a dead +2a/3. The PC doesn't really ... ULA deals with keyboard input, sound in/out (via tape and beeper), memory ...

... not found my +D and 3.5" drive either (which ... It would have had no loading screen (just a BASIC loader ... drawn by me), probably no sound (maybe the odd beep), and ... +D (the +D made loading and saving [B]so[/B ... computers etc) onto real Spectrums via the +D. I don' ...

... the speccy also output sound that is heard via the internal speaker ... same ULA pin, used as input/output. The only differences is ... mV for MIC and 2-3 Vpp for EAR. And Yes ...