-
questions about the +2 and +3I can`t remember if the +2 and +3 had a port on the back of the computer that let you use your own tape recorder so i`m asking if there was or not ?
... I did it - taking input/output to separate sockets. I used ... . Don't forget that the output (play) level is greater at ... particular socket than the normal mic levels (I think it peaks ... -
Lead ProblemI want to record games from the net using taper onto my pc and someone suggested taping them with a 3.5 headphone socket with 2 phono lead to plug in…
... the soundcard) the other is OUTPUT for saving to tape - ... (for the tape recorder mic socket) and a mono/ ... /load lead from the output of the soundcard to ... soundcard to go to the mic socket - experiment a little ... that input instead of the mic socket. But make sure ... -
How do you get an external tape recorder to work on a +2a?Just for the hell of it, just say the internal cassette player stopped working. What command would you use when hooking up an external player, so the…
... 3.5mm socket is for OUTPUT only, connect to the earphone ... .5mm socket connects to the MIC socket on your recorder.
mic, the ULA will blow. I ... -
Old Spectrum QuestionI've asked this before but didn't get a straight answer. I want to download games off my pc and record onto tape. I want to buy a lead which connects…
... output (usually coloured green) and the other end goes to the mic ... the mono plugs into the mic socket of the tape deck ... -
Old Spectrum QuestionI've asked this before but didn't get a straight answer. I want to download games off my pc and record onto tape. I want to buy a lead which connects…
... output (usually coloured green) and the other end goes to the mic ... the mono plugs into the mic socket of the tape deck ... -
some questionshello all, I havent been here for a while, but Im back, older and wiser (I hope). No more stupid spectrum OS ideas. Well I have a speccy + 2a and I …
... put a signal on the output line on the PCB pads ... sound from the CD player (output) to the PLAY, and leave ... sure it goes to the MIC input on a tape deck ... . One for input, one for output. Different sizes to stop you ... -
i dont know what iam doingHI ive just dug out the old speccy and she runs find after 10 years under my bed at me mums house! I was just reading the "some qustions" thread and …
... player isn't designed to output lots of audio power into ... your personal CD player's output through an amplifier, it'll ... EAR socket tho, not the mic. When converted to WAV format ... -
my dodgy speccys.hi people, i was wondering if i could engage some opinions / thoughts / ideas of anyone, regarding my current "fixing up" of my speccys, since you s…
... the tape socket - it's output only (so you can save ... on the output line (or try to load via the MIC connection ... -
mp3/wav download spectrum gamesI'm new to this board and would like to say hi!.. Just recieved a zx spectrum from ebay today. I used to have tons of tapes many eons ago but they ha…
... on the laptop to the mic on the speccy...then just ... the time (oh, have the output set on mono).
tapper on xpdoes tapper work on xp? planning to convert tzx to voc to wav
... lt;
Output (MIC) _/\ |_| ^ | | _-^------------. \ To MIC socket
... / |____
Output GND \__| |____()
(MIC) (common) \___ ...Spectrum 128+2Greetings to all My Speccy Tape Drive has died. Fully blown :( Is there any way to hook up a external cassete player to the +2? I can't see any "lin…
... /> The 2.5mm connector is mic out and goes to the ... mic connection on your tape deck. < ... would surely make "PLAY" the OUTPUT from the Spectrum, while "REC ...Spectrum 128+2Greetings to all My Speccy Tape Drive has died. Fully blown :( Is there any way to hook up a external cassete player to the +2? I can't see any "lin…
... the PLAY connection as an output connection, and the REC connection ... mainboard is an OUTPUT TO the tape deck, or MIC OUT on ... the original 48K machine, thus an output as ... , the PLAY pin is an OUTPUT from the TAPE DECK and ...128k dead, no TV signalI got 128k spectrum (heatsink model) from a friend of mine. He told me that speccy is dead, and he doesn't know what's wrong with it. When I plugged…
... the TV output of the 128 is the same frequency as the ...128k dead, no TV signalI got 128k spectrum (heatsink model) from a friend of mine. He told me that speccy is dead, and he doesn't know what's wrong with it. When I plugged…
... the TV output of the 128 is the same frequency as the ...MP3 loading testsIn a previous thread, Spector says: "The loss of an mp3 file is nothing compared to the loss from an old audio cassette tape. " Dunny says: "Which i…
... into speccy is (except the mic thing :) ) to amplify them by ... is spectrum loading from an output socket??
thanx in ...MP3 loading testsIn a previous thread, Spector says: "The loss of an mp3 file is nothing compared to the loss from an old audio cassette tape. " Dunny says: "Which i…
... into speccy is (except the mic thing :) ) to amplify them by ... is spectrum loading from an output socket??
[/quote]
Because ... it's magic :D
Output and input sockets are made ... with them connected to the mic jack of your stereo, they ...voice sampling with ADCs and DACsHi sorry it's off topic, but I wonder if anyone can help with an electronics problem. I'm trying to build a project for A-level electronics, using an…
... clean and free of mains frequency ripple)
Are you ... might want to pass the output through a simple buffer (such ... resistor so when the TTL output is at logic 1, the ...Timex Sinclair 2068Hi guys. This is my first post here, the first of many, I hope.. :) I have a Timex Sinclair 2068 but don?t know much about it. It was given as a gif…
... 09/15/1983
Lower Frequency 54.0
[/quote]
Yeah not quite :-) The output is a short machine code ...How Loud Is A SpectrumHi All How loud a Spectrum.. I have yet again bought a third 48k Spectrum that seems to have problems. The machine in question all works but the …
... booster" that plugs into the mic socket on the back of ... 48K machine - the 128's output audio to the TV.Timex Sinclair 2068Hi guys. This is my first post here, the first of many, I hope.. :) I have a Timex Sinclair 2068 but don?t know much about it. It was given as a gif…
... (this will introduce a high frequency whine) or by using the ... nonlinear nature of the AY output is taken into account). Samples ...ZXSP Emulator running too fastHi All, I was wondering if any of you have had a problem whereby the zxsp emulator runs too fast so won't load games etc? For example, when loading…
... the speaker bit regardless out output sample frequency!Issue two picture qualityDoes anyone know if issue two and earlier spectrums have worse picture quality (in general, beside colours) compared to issue 3 and later? I mean on…
... recently) that the composite output does not show the ... stage of the TV output, it's a fair ... sympathy with an audio output strongly suggests that the ... RF output is being modulated by ... known as RFI (Radio Frequency Interferrence) where a radio ...My latest invention: The PilsenerBoxI'm hereby proud to present "The PilsenerBox Mk I". A MUST for every Spectrum owner. [url]http://193.71.117.167/misc/pilsenerbox.jpg[/url] This m…
... attached the amp output to the Speccy mic - which is ... also an output. I would ... have connected Speccy mic to the ... inputs, and feed Speccy mic to either left or ... amp and feed Speccy mic to either one. Signal ...My latest invention: The PilsenerBoxI'm hereby proud to present "The PilsenerBox Mk I". A MUST for every Spectrum owner. [url]http://193.71.117.167/misc/pilsenerbox.jpg[/url] This m…
... />
Both EAR and MIC are linked together by some ... loading games from the headset-output on my PC, as I ...Keyboards - thanks to rwap!I've just completed repairing a rubber Speccy that I have (bad RAM and bad keyboard membrane). I ordered a new membrane off rwap just before I left H…
... . Just plug it into the mic socket for very loud gaming ... booster amp to amplify the output of (say) an iPod or ...Question about digitized sound and videoI searched the forums and couldn't find the answer, so here it goes. Regarding digitized sound: I remember reading an article long ago about a vid…
... on the beeper. The carrier frequency is at 16kHz, that's ... than the Sample Tracker beeper output. Some emulators don't emulate ...Audio input on a +2would it be possible to connect an external tape recorder to the socket at the back,or would something bad happen?
... EAR output but it uses the AUX instead of the MIC for ... to lower the line level output to MIC levels. (Microphones go through ...Audio input on a +2would it be possible to connect an external tape recorder to the socket at the back,or would something bad happen?
... frst though.
The output of the internal deck SHOLD ... is an OUTPUT and connects to the tape decks' mic socket. The ... need a resistor unless the output level of the SAVE connection ... used to power small electret mic elements, the signal is normally ...
