-
Spectrum +2 / +3 Printer cableHi all I have a Star LC10 printer i'd like to get going with my newly resurrected +2 and +3. I have the ribbon cable with Centronics end, but ob…
... /> I have a Star LC10 printer i'd like to get ... />
I have the ribbon cable with Centronics end, but obviously ... to fit on a ribbon cable- anyone know where I could ... -
Parallel to serial z80 i/o portI have an Opus Discovery and an Alphacom 32 printer. I want to see if I can make a cable that will use the Opus Parallel printer port. The question i…
... printer. I want to see if I can make a cable ... that will use the Opus Parallel printer port. The ... 32 pins to the Opus printer port pins...
Cable[/url] by [url=https ... i can make a custom cable. Any help or pointers ... -
printer port redirect to (Windows) system printerIs there any emulator (+2A/+3 compatible) that can be configured to output the, say, parallel printer port to the Windows system port ? The default o…
... configured to output the, say, parallel printer port to the Windows system ... -
RS232 - built-in vs. Interface 1Hello all. After some advice, and I figured someone here would probably be able to help. I'm the owner of a (grey case) Spectrum +2, and I'm keen …
... via a QL serial-to-parallel cable, and it works fine ... a cable for connecting the IF1 to a serial printer, and ... I have a printer on the ... 48K mode drives the ZX printer, and in 128K mode ... as I have the IF1 printer cable, which ends in a 25 ... -
Printer to ZX SpectrumHi! I wonder is it possible to attach any other printer to rubber key ZX Spectrum than those thermal paper ones (i own one). I mean any dot matrix p…
... to attach any other printer to rubber key ZX ... I mean any dot matrix printer. I bought Wafadrive (haven' ... it possible to connect any printer to Spectrum through centronics?< ... connect any(*) parallel printer to your Wafadrive with the correct cable.
... -
Help identifying peripheralsHad a load of stuff in today, plus some mysterious peripherals and leads, can anyone here identify them? (theres no markings, numbers or anything on …
... it has a power supply cable coming out of it, but ... [/I]). It goes into the parallel (printer) port and accepts two single ... -
Anyone using an RGB SCART cable with a +2A/+3 and LCD TV?In [URL="http://www.worldofspectrum.org/forums/showthread.php?t=44697"]a recent thread[/URL], I mused: [quote]Can +2As be composite modded? If so, I…
... .wikipedia.org/wiki/Parallel_port"]Centronics parallel printer[/URL] ports. Both are suppose ... , they're an analogue RGB cable with a euroconnector on the ... -
ZX PrinterI've picked up a ZX Printer and was wondering if its possible to use suitably sized thermal paper rather than the silver Sinclair stuff. If not, is …
... busy with a interface cable, either serial or parallel that you could ... and print directly to a printer. He said that he will ... communication and for connecting a parallel printer can be built quite easily ... -
IF1Bis problems. The Edge of the Spectrum...Advice is sought from the learned on WoS. I just bought an Interface 1Bis from sunny South Africa. It arrived fast, but unfortunately doesn't work.…
... server machine with the USB cable, but do not start the ... ) to Spectrum with an audio cable from the ear connections
cable to the headphone plugs on ... system upgrade to test the parallel printer interface of Dan and the ... -
SD Card Interfaces for the ZX Spectrum : the complete list OK I admit it : this thread will start life as the incomplete list of SD card interfaces but the aim is to list the lot
... cable, with or without a RS232 trans-receiver
Serial printer ... br /> Parallel printer, through a serial to parallel adaptor
'EAR' cable for rendering ... tape player' and the 'EAR' cable.
- Integrated Game Browser and ... -
Is it possible to use two spectrums linked with one acting like a co-processor?Just wondering. Would be kind of interesting, but I guess two interface ones would be needed, or was there other ways to connect. What about ear t…
A proper bidirectional Centronics parallel printer interface with a crossover cable would probably be ... -
Z88I Have a Working Z88 complete with 128k EPROM Pack, 128K RAM Pack, Soft Carry Case, PSU, Printer Cable and Manual. I also have Spare:- 1 off 32K…
... Pack, Soft Carry Case, PSU, Printer Cable and Manual.
I ... -
CHROME: a new ZX model! :)Probably You know already about 'last days news', but well... ;) Such informations are so important that I'll put it here: here is a news about n…
... , Expansion port, I2C interface,
parallel printer out
Storage Cassette recorder ... -
Adventures in Programmable Logic Part 2So, now armed with an Xilinx Parallel III cable, an XC9536 CPLD, a breakout board with power, a JTAG pin header and a 44-pin PLCC socket, I could try…
... armed with an Xilinx Parallel III cable, an XC9536 CPLD, ... discovered the as-supplied cable drivers are crap ( ... a kernel driver for parallel or USB). However, ... I bought a buffered parallel cable, because otherwise the ... PC's parallel port would have ... -
Various kit for saleListed a big collection of hardware - sadly no R@RE Make A Chips though: Lightguns Kempston Centronics Interface QL / Spectrum 128 Serial printer ca…
...
QL / Spectrum 128 Serial printer cable
Interface 1, twin Microdrives ... -
MB02+ software and system developmentsThe following text was (before last modification) first published here: [url]http://www.sintech-shop.com/forum/board.php?boardid=20[/url] As discuss…
... , HDD, 3 x 8 bit parallel port (partly used for Kempston ... into contact with ambience. A parallel printer or A/D- D/A ... simply be connected to that parallel port. So the MB02+IDE ... -
SAM Coupe items - freeI've got a few surplus SAM Coupe items, found in a Spectrum lot I bought. Free to anyone that is interested as follows: SAM Parallel printer interfa…
... as follows:
SAM Parallel printer interface box (FORMAT publications) - 26 ... -
Looking for contact!Hi all, Back in 1998 I sold most of my Spectrum gear........I traced the add in comp.sys.sinclair and it's quoted below. I think I sold it to JAMES …
... have a full size centronics (parallel) printer, so the
above eprom ... to Parallel interface
also so that I could driver the printer ... extra code (tsr's).
Printer not supplied.
PS. No ... -
Lpt-ayOK, todays task is going to be building the above. I'm using the details from here: [URL="http://bulba.untergrund.net/elect_e.htm"]http://bulba.unter…
Repair / technical knowledge baseI wish to start a dedicated repair and technical knowledge base, something that can be upgraded in time with more info. Maybe this question has been…
... /> - Multiface
- Opus Discovery
- Parallel printer ports
- PC keyboard interfaces ...Downloading code to physical hardwareHi folks, Back in the day, my devkit was a TRS-80 and I had a simple connector device from the TRS-80 parallel (printer) port to the expansion bus o…
... device from the TRS-80 parallel (printer) port to the expansion bus ...Sinclair QL BIG JOBLOT: 16 Original Boxes + 3 Books + Parallel Printer Adapterhttp://www.ebay.co.uk/itm/-/172893288629 Have a nice bid ;)
http://www.ebay.co.uk/itm/-/172893288629
Have a nice bid ;)Can I convert a sna to a real tape ?Hi I just want to know if there is a way to convert a spectrum files for emulator to a real tape that I can load to my real spectrum. Or convert a r…
... it via a jack to parallel (printer port) connection. I've never ...printer port redirect to (Windows) system printerIs there any emulator (+2A/+3 compatible) that can be configured to output the, say, parallel printer port to the Windows system port ? The default o…
... /> Fuse's emulation of the parallel printer will just output every byte ... just sending this to the printer (possibly with appropriate magic beforehand ... to kick the printer into an appropriate compatability mode ...printer port redirect to (Windows) system printerIs there any emulator (+2A/+3 compatible) that can be configured to output the, say, parallel printer port to the Windows system port ? The default o…
... above printer_parallel_strobe_write in Fuse's printer.c.[/quote]
... 's emulation of the parallel printer will just output every ... sending this to the printer (possibly with appropriate magic ... beforehand to kick the printer into an appropriate compatability ...Citizen 120 printersHi everyone! I was wondering if any of you guys can remember the pokes needed to get the Citizen 120D printer working with the +3? If anyone has a p…
... ]
Link to DIY Printer cable
[url="http://www.pcwking ...ZX Spectrum PrinterfaceHooray, I finally got my +3 to print. I made up an adaptor the other day, edge connector-25way D that plugs into an ordinary centronics cable, and n…
... has it's centronics compatable printer port, which is connected using ... />
just open up the printer cable, and write down which wire ...
then solder the ribbon cable in the same order to ...
NOTE 2: the ribbon cable is numbered in alternate rows ...ZX-PC InterfaceRight - i'm 34 and I cant take the pain of waiting for tapes to load any more - somethings gotta give ( either the tape deck or me ). I've seen a 'Z…
... />
[quote]
The Centronics parallel printer port is basically just an ... STROBE signal for the
printer is produced by the ULA ... the BUSY line from the printer is
read from bit ...ZX-PC InterfaceRight - i'm 34 and I cant take the pain of waiting for tapes to load any more - somethings gotta give ( either the tape deck or me ). I've seen a 'Z…
... />
[quote]
The Centronics parallel printer port is basically just an ... STROBE signal for the
printer is produced by the ULA ... the BUSY line from the printer is
read from bit ... STROBE signal for the
printer is produced by the ULA ...Eprom blower for IF2 cartridgesI saw the other thread about eprom blowers, but this is somewhat different. I've been talking to Paul, the creator of the custom 128K keypad and cust…
... on Ebay, plug into the parallel printer port and take power from ...
