-
printer port redirect to (Windows) system printerIs there any emulator (+2A/+3 compatible) that can be configured to output the, say, parallel printer port to the Windows system port ? The default o…
... /> bit 4 / port OUT #1FFD (the port strobe, active low)
printer.c.
... sending this to the printer (possibly with appropriate magic ... beforehand to kick the printer into an appropriate compatability ... -
printer port redirect to (Windows) system printerIs there any emulator (+2A/+3 compatible) that can be configured to output the, say, parallel printer port to the Windows system port ? The default o…
... printer_parallel_strobe_write in Fuse's printer.c.[/quote]
... 4.1, then the port strobe works the right ... reset, the OUT #1FFD port resets to 0 state ... emulator can simulate a port's bit SET action ... sending this to the printer (possibly with appropriate magic ... -
Will my joystick adaptor work with a heatsink speccy?Ok ive just bagged a 128k heatsink spectrum on ebay. I have one problem though i have a RAM joystick interface mk2 and im not sure if its ok to use w…
... your interface got no through-port and it does not need ... ZX Spectrum or ZX81 (ZX Printer for example).
So test ... -
Looking for a printerDoes anyone know where the best place is to buy a printer for the spectrum is? Also which is the best model to have? I'm learning to program on my …
Bearing in mind he means Centronics Parallel port printer. Don't expect USB or Windows printers to work.
In general he's correct though :)
Regards
Andy Barker -
+2B & Connecting An Alphacom HELP!!!Hi there I recently bought an Alphacom32 and when i came to plug it in. I found that my +2B doesn't have a port for it. Can anyone help me out..I've…
Its been said before that a ZX printer could be made to work but with a lot of trouble modifying the rom and changes to the edge connector etc. Some older ink jet printers would connect to the parallel port. -
OT: INKJET REFILLS..Is it me? Or has any body else have a hassle with re-filling Inkjet printers. My Epson C82 , now a few years old cost ?29.99 for the black cartridg…
... 's your unfortunate choice of printer. :p :D
If ... ]thoroughly[/I] sealed the exit port (thank goodness I followed the ... -
how does the printer port work?I know nothing about printers, I gather that when the spectrum has an output to something to represent a letter, it sets the strobe to low and back t…
... more detail on the parallel port operation.
... got this ancient dot-matrix printer working happily with Windows ... based operations on a parallel port printer.
However if ... talking about the original Sinclair printer it may do things ... -
New Compo IdeaI've had this idea and would like to know what do you think about it. I think that most of us here know how to code in BASIC. The problem with Specc…
... keys are pressed. Each port address covers 5 keys of ... (0) or depressed (1). The port addresses are:
IN ... [Chaosmongers].
* Port #254
-----------
Port #254, used as ... to be send to the printer. A zero would mean it ... -
EPP and SPP printer portsWhats the difference between the two? How can I find out whether my PC has an EPP or an SPP printer port?
... the printer only) and EPP (a more modern kind of port) is ... -
Some thoughts about emulationWhile discussing about 'real tape loaders' I just thinked about wat is total emulation (most complete, perfect). Some authors prefer for example loa…
... can "hear" through the EAR port - it can be a simple ... . Not to mention that ZX printer was not produced in large ... -
Games that crash because of contended memory.I find these are really annoying. You load up a game like Astro Marine Corps, Fantasy World Dizzy, Dizzy: Prince Of The Yolkfolk and so on (the init…
... the games that used the printer buffer (23296-23551) for loaders ... because the DISCiPLE's kempston port had the top 3 bits ... -
BASin Release 13 is now available[unashamedly x-posted from Emulators forum] I'm still at it. BASin is now in it's 13th incarnation (disregarding the inter-version updates) and is …
... tips getting BASin's printer driver to talk to ... it's a standard windows printer routine, and it works fine ... then click the "send to printer" button.
Hope ... input on bit 7 of port $FE (like the ZX81 ... BASin to drive the printer in some other way...< ... -
External Speccy CommunicationHow does a speccy communicate with the outside world ?? Do you have to have the interface 1 for serial communications ( rs232 ) or are there other p…
Just for info, the RS232 port on the Spectrum +2A,+2B ... allow you to connect a printer. Alas the wiring on the ... -
External Speccy CommunicationHow does a speccy communicate with the outside world ?? Do you have to have the interface 1 for serial communications ( rs232 ) or are there other p…
... . Port is used only for printers (in those times many printer had ... serial port).
There is ... -
More USB Ports Needed!!I have run out of USB ports on my machine.... I currently have 6 in use. will it be better for me to buy a hub or add an USB2.0 four port card?? Wi…
... /> 3 B&W Laser printer
4 Deskjet
5 ... CD Printer
6 360 Gig HD ... memory sticks hanging off a port somewhere as well.
More USB Ports Needed!!I have run out of USB ports on my machine.... I currently have 6 in use. will it be better for me to buy a hub or add an USB2.0 four port card?? Wi…
My to-buy listWhat I want to buy: -ZX80 - [COLOR="Red"]bought[/COLOR] -ZX81 - [COLOR="Red"]bought[/COLOR] -ZX Spectrum 48K - [COLOR="Red"]bought!!![/COLOR] -ZX…
... supply a boxed Sinclair ZX printer and manual with one almost ... paper in place in the printer and two totally unused reels ... I would imagine.
The printer was working last time I ... from the Spectrum rear connection port, but then again I had ...External Speccy CommunicationHow does a speccy communicate with the outside world ?? Do you have to have the interface 1 for serial communications ( rs232 ) or are there other p…
... . Port is used only for printers (in those times many printer had ... serial port).[/B]
Mr ... access the 128K machines serial port in BASIC? I can assure ...External Speccy CommunicationHow does a speccy communicate with the outside world ?? Do you have to have the interface 1 for serial communications ( rs232 ) or are there other p…
... itself as a virtual com port to the PC, and had ... don't have a laser printer :)Printers for Spectrum +2 and +3It seems that the only printers availables for ZX Spectrum were ZX printers and compatibles (connected through the expansion bus), but Spectrum +2 an…
... describes printer operations in detail, the default setting is the parallel port ... .
any centronics compatible printer should work, many seem to ... should just plug into any printer with an LQ mode and ...Timex Sinclair stuff wantedI will pay 500USD if someone can sell me all of the following items: 1 Timex Sinclair 2068 1 Timex Sinclair 2090 command stick 1 " " …
... to do with the cartridge port is to hook up 64K ... even a printer interface made that worked in the dock port. I ...Timex Sinclair stuff wantedI will pay 500USD if someone can sell me all of the following items: 1 Timex Sinclair 2068 1 Timex Sinclair 2090 command stick 1 " " …
... to do with the cartridge port is to hook up 64K ... even a printer interface made that worked in the dock port. I ...Possible great ideaHello there everybody, I have been toying with the idea of doing a project here with the help of the gurus on the forum. The idea is to start the de…
... an original one but a port, the planning process was quite ... initially. Something like a text printer that does multiple lines with ... and a double-width text printer that can print onto the ...Spectrum Amstrad printer leadHi, just been doing a search on the Spectrum+2A/+3 printer leads. Now as I understand it the Amstrad CPC464 and CPC6128 printer leads are compatible…
... colour, and an Amstrad DMP2160 printer attached to my +3.
port, and if you only use the Amstrad printer, it ... /> I can confirm that the printer lead is a 34 way ...Anybody in the printing trade?I'm after the name of the object created on plastic film containing an extremely contrasty image, used to photo etch the printing rollers. It's like…
... is the ink in my printer isn't quite dense enough ... . I could use a laser printer on maximum density/contrast (or ... to make a simple thru port PCB for a speccy innit ... ? Well, that's a thru port, and I need to make ...Regarding older dot-matrix printersLong ago I had the [URL="ftp://ftp.worldofspectrum.org/pub/sinclair/hardware-adverts/ZXLprintIII.jpg"]Lprint III interface[/URL] and I still have (in…
... (in Portugal) the Seikosha printer that my parents gave me ... multiprint interface if the Seikosha printer is found to be ... these could controlled with old printer interfaces.
I ... inkjet printer then find one that as well as being parralell port ...ANN: SP1 for Z88DK (aka splib3, Sprite Pack v3.0)Well it's finally arrived, after a month of "a few days from now" release deadlines. SP1 is the lastest version of splib, a flicker-free software sp…
...
#define R 65533 // port
#define S 49149 // data ... 32 and a 64 column printer (64 columns is the default ...I've got a divIDE. Now what?I've purchased a divIDE and after a month it's at home. What can I do now with that? I've got a 48k+, a +2B and a +3. The +2B has the original ROMs,…
... pretty nifty. It's a printer interface too btw :)
port or a joystick ...Recent Returnee to the spectrum fold needs hardware adviceHi all. Thanks for taking the time to read this. This is my first post to this forum after I stumbled on this site just a few weeks ago, i only reg…
Manual confirmation of new forum accounts?I asked my cousin to become a member of these forums. He says he registered but can't reply to threads. Is Martjin doing something else to approve ac…
... a Spectrum, from the expansion port (the one where we could ... a 24V transformer (from a printer) to the Spectrum (that required ...
