-
Comparison of RS232 port on Interface 1 with that on Spectrum +3/+2AHi everyone, I'm writing a tool (in machine code) to transfer data (for example, an emulator snapshot) between a PC and a real ZX Spectrum, over t…
... writing a version for the RS232 on the Interface 1 ( ... with the built-in serial port on my +3. However, ...
Looking at the serial-port driver code in the Interface ... 3 code accesses the serial port via the AY-3-8912 ... for why the +3 port doesn't seem to be ... -
RSP - RS232 Patch for MB02Hi all, I patched tape LOAD/SAVE routines in BSROM by RS232 communication routines with TAP emulation. In principle you only send TAP file to COM por…
... /SAVE routines in BSROM by RS232 communication routines with TAP emulation ... send TAP file to COM port on PC side (e.g ... is required, internal 128k's RS232 port is used, therefore only simple ... -
+2 serial port adaptorSome year ago, a friend, electronic expert, soldered a small flat (five cables) on the motherboard on one of my grey +2s, where the internal electron…
... the internal electronics contacts for RS232 port are.
We ... a standard serial female 9pin port on that cable (since BT ... on the motherboard, near the RS232 port?
2. How to make ... from, writing to the serial port)?
Thanks
... -
Outputting debug trace to RS232 (assembly)Hi Guys, I'm working on a game at the moment (written in assembly) but I am really needing to write out a debug trace of what is going on with the p…
... out of the emulator via RS232 to a flat ascii file ... how to write to the RS232 port via assembly. I'm sure ... examples. As for the 128K RS232 port, I can't find anything ... -
RS232 on Spectrum 128KDoes anyone actually use the RS232 port on the Spectrum 128K? Is there anything useful that can be done with it? I know about the keypad with the Sp…
Does anyone actually use the RS232 port on the Spectrum 128K? Is ... 'm wondering about supporting the RS232 interface on the AY chip ... ; same could be said of RS232!
Richard -
Interface 1 - RS232 question.I am thinking about doing some Spectrum stuff based around the RS232 port used on the Interface 1. Has anyone had any joy doing this with an emulator…
... Spectrum stuff based around the RS232 port used on the Interface 1 ... -
Grey +2 and RS232 printersI've got an Alphacom 32 printer that works alright in 48K mode, but I'd like to hook up a full size printer to my +2. Has anyone had much joy in gett…
... much joy in getting the RS232 port to drive a printer? Is ... -
program upload via Interface 1 RS232 from PC/Mac/LinuxHello. I've made good on a promise to my 13 year old self and have been recently learning spectrum z80 coding. I can happily build a program (as …
... over the Interface 1's RS232 port, but would appreciate anyone confirming ... the .tap file bytes over RS232 at the agreed baud rate ...
d) build an appropriate RS232 cable
Presumably there ... -
Interface 1 RS232 Just Speccy 128 (again)ok so i started this post in the wrong section so here it is again. [b]thesender[/b] [i]Im a little perplexed I have a 48k Spectrum+ with Interfa…
... to my laptop(Windoze10) via rs232 and have no problems pushing ... doesn't have a serial port like a real 128 Spectrum ... , but not sure about the rs232 port and no the JustSpeccy has ... no serial port [/i]
[b]GReW ... -
RS232 connector dead? No light gun seenHello Today I tried to play some light gun games, which use a controller connected to the 431A socket which is labeled as "RS232" using a BT 4 co…
... socket which is labeled as "RS232" using a BT 4 connector ... next suspect would be the RS232 port itself... My machine is a ... -
RS232 - built-in vs. Interface 1Hello all. After some advice, and I figured someone here would probably be able to help. I'm the owner of a (grey case) Spectrum +2, and I'm keen …
... +2 has a built-in RS232 port, but as far as I ... IF1? Also, is the IF1 RS232 port useable in 128K mode? I ... 128K mode goes to the RS232, so does that mean the ... will correctly use the IF1 RS232 in 128K mode? I hope ... want to use the IF1 RS232?
Also, as ... -
Sinclair light Gun ?Just wondering if the Sinclair light gun that came with the +2 & +3 models would work on a Spectrum 128k+ (heatsink model)? And also what port did it…
... /> And also what port did it use...the RS232 port?
And ... -
An idea for a keyboardHi guys, I was just thinking there just now (first time for everything). I was thinking about an AT keyboard on the Speccy. I remember a few peopl…
... basic protocol that runs on RS232 signal levels. The scanning routines ... on a serial protocol. Not RS232, but serial none the less ... 12volt output on the Speccy RS232 port which could be used to ... being the same. Using an RS232 device as keyboard input. Am ... -
3" disk preservation - optionsFor now we're still able to find old PCs with Floppy drives, floppy drive cables, new PCs that may not have a Floppy drive but still have the FDC and…
... would be sent through the rs232 port to a com or lpt ... port on the pc. A client ... c) but using the parallel port instead of USB.
The parallel port and FDC are disappearing quickly ... -
speccy 128 toastrack joysticksDoes the RS232 port (or the keypad port) work as a joystick port on the toast rack, and if so what 'system' is it...interface 2 or kempston? Secondl…
Does the RS232 port (or the keypad port) work as a joystick port on the ... -
The Konix Liberator 10 Function Interface.In the 'What We Got' thread JP asked if I could upload some pictures of my Konix Liberator. Well here they are, well some of them. The rest are on my…
... ) Centronics Printer Interface,
2) RS232 Port,
3) Sound Though the ... slow mode,
5) Video Port (composite),
6)All joystick ... ) Reset Switch,
8) Through Port,
9) Save and Load ... -
Looking for contact!Hi all, Back in 1998 I sold most of my Spectrum gear........I traced the add in comp.sys.sinclair and it's quoted below. I think I sold it to JAMES …
... /> with the Spectrum Interface 1 RS232 port. Basically I built this (my ... -
Midi out on a ZX SpectrumYears ago (may be over 15 years...) I soldered a small adapter that lets a keyboard or synthesizer connect to the ZX Spectrum 128K's midi/RS232 port.…
... ZX Spectrum 128K's midi/RS232 port.
For ... pin 1) of the RS232/Midi port (see the schematic underneath ... (pin 5) for RS232 communication is also used ... Out and Ground of the Rs232/Midi port.
... 5 of the RS232/Midi port enough to connect ... -
Emulator to create log files?Could someone please recommend a Spectrum 128K emulator that can dump the following data to an external text file, while emulating at normal speed? …
... /> 3. The output of the RS232 port, which will be written from ... -
Upgrading the Humble Spectrum 128 +2 (Grey)Hello there my fellow WoS'ers I am at a subtle in-pass in my wants for one of my +2 motherboards. I received this mobo, DOA in a job lot from fleab…
... is not difficult since the RS232 port can use a MAX232 IC ... -
QL in bits from car boot saleI was at the car boot sale today, and I bought the following for ?40: * Spectrum+ * Tape recorder * An external Microdrive (no Interface 1 unfortuna…
... kit, a DE9 RS232 connector for the RS232 port on some Spectrums)
port to plug it in has ... -
Spectrum / PC Serial Networking (on 128k, +2's etc)Hello there my fellow WoS'ers I have been looking around getting some system readyfor replay, and in one of these stints I notices a PC (RS232) Seri…
... stints I notices a PC (RS232) Serial to Interface 1 linkup ... +3 models all have an RS232 port -
I am surprised ... -
Spectrum 128 & bundle of peripherals for saleHi, I'm based in Brighton, Sussex, UK, looking to sell the following big bundle of bits - preferably to a local-ish buyer who can collect in person,…
... on one, connects to Spectrum RS232 port)
Most of these ... -
Spectrum +3 CP/M serial-transfer optionsHi everyone, I suspect this is a long shot but does anyone have any experience of transfering files between a PC and a ZX Spectrum +3 running CP/M…
... using the built-in serial port (intended for serial printers) and ... cable to connect to an RS232 port on a PC. I am ... this is a fairly basic port.
I can perform ... is challenging for builtin serial port because of its rudimentary make ... -
spectrum on pcI was just wondering,the pc is brilliant for speccy emus but wen playing speccy games on a pc keyboard it just doesnt feel rite for sum1 who used to …
... additional hardware (other than the RS232 port in the speccy and the ... -
spectrum on pcI was just wondering,the pc is brilliant for speccy emus but wen playing speccy games on a pc keyboard it just doesnt feel rite for sum1 who used to …
... speccy doesnt have a RS232 port,is there an rs232 adaptor?,i know ... the amstrad speccys had rs232 ports(the +2,+2a and ... -
spectrum on pcI was just wondering,the pc is brilliant for speccy emus but wen playing speccy games on a pc keyboard it just doesnt feel rite for sum1 who used to …
The Interface 1 provides a RS232 port for the old speccys. Regarding the monitor thing, my TV tuner won't find the speccy at UHF 36 but perhaps some other makes will. -
ZX48k terminal...Hello everybody, I thought someone might help me. I connect my good old ZX48k to my PC via serial (IF1) link, and I was trying to write a little term…
... of interface1 reads from the RS232 port also checks for break. Suppressing ... code program to read the RS232 and solve both problems in ... ;38" to refer to the RS232 input hook code, it won ... receive a byte from the RS232 port tests for break. You will ... -
Sinclair Light GunAny idea what it actually does? And how you connect it to a +2A?
... . I tried the RS232 port and the AUX port. But I don't ... -
Distribution of the Spectrum in Europe.Ok, so we've noticed the lack of French posters (there might be readers we don't know about) here at WoS. We have people from UK of course, from Irel…
... -standard non-subD 9 pin RS232 port, which put the sales down ...
