-
Spectrum +2a / +3 SCART LeadsEvening all, Over the past week or so I've tried two different Spectrum RGB SCART leads from two different Ebay sellers, on a Spectrum+2A and a Spec…
... />
The 'auto-switch-to-SCART-input' is done through other ... [I]manually[/I] selecting the SCART input, image shows okay. With ... 9 format input selection) of scart to switch the composite input ... is used. AND second the blanking signal with an amplitude of ... -
Help me understand ZX RGB signal (long)This will be a long post so please bear with me and most importantly help me. I have a 128K+ and +2A that I'm trying to get working with my 15kHz RG…
... and testing +2A,+3 SCART cable from two different sources ... missing an input on SCART PIN 18 - Blanking Ground. After bridging ... looked at 128K (heatsink) SCART cable from RetroComputerShack and it ... I also have a SCART cable for Commodore AMIGA from ... -
Help me understand ZX RGB signal (long)This will be a long post so please bear with me and most importantly help me. I have a 128K+ and +2A that I'm trying to get working with my 15kHz RG…
... .3V
+12V on SCART PIN 16 (Blanking): 12.3V
Audio ... .75V
Composite Sync to Blanking on SCART 16: 3.8V
Composite Video on SCART 20: 4.48V
Blanking on SCART 16: 4 ... .89V
Function Switching on SCART 08 ... -
Help me understand ZX RGB signal (long)This will be a long post so please bear with me and most importantly help me. I have a 128K+ and +2A that I'm trying to get working with my 15kHz RG…
... pins 16 and 18 inside scart connector.
put MINUS (marked ... 1.5V battery on the blanking pin. -
+2a CompositeWhile faffing around with my +2a I did a down and dirty mod from pin 6 of the tea2000 straight to the modulator output bit like the womble hack for t…
I also had Christian Secara's mod done to my +2A and +2B and have mentioned it here many times. ;) It was the best way for me to use them here in the U.S. No Scart option over here. -
zx spectrum +2 troubleshootingHi There I am new here and I need some advise as to where to look for issues on my zx spectrum +2 it was working fine this morning .. then while pl…
... ]so I did the composite mod to bypass the RF module ... out because some RGB-to-SCART cables use the +12V voltage ... -
+3 issues....Hello All I came by a couple of +3's on ebay and I'm having issues with them. Since I only ever owned a rubber key, thought someone might be able to…
I did a quick composite mod on mine runing from pin 6 of the tea2000, works but the picture is quite dull compared to my scart signal -
48k scartAnyone use or know anything about these? [url]http://cgi.ebay.co.uk/Sinclair-Spectrum-Composite-Video-Mod-Kit-Scart-TV-/260684941076?pt=UK_VintageC…
... assume the 'kit' is a scart lead with a phono plug ... to perform the 'full' modulator mod (empty it and fit a ... actually, one of the two scart inputs does not have composite ... / page for the 'full' modulator mod ? , I have seen the 'chop ... -
What Spectrum to choose?Hi i'm new to the Spectrum. I read 'bout it in CDA (Polish game magazine) and watched LGR review of the 48k and it REALLY interested me. What model m…
... know how to do a mod to allow an external tape ... back, which when connected via scart gives an excellent picture and ... bad when connected with the SCART cable, but sounds awful with ... -
+3 s-video outAs I mentioned in another thread recently I use my +3 through a TV card, there is therefore no way to make use of the RGB output, and the composite s…
... anyone else to do this mod. You have to cut out ... a telly that has a scart input so are better off ... -
+3 s-video outAs I mentioned in another thread recently I use my +3 through a TV card, there is therefore no way to make use of the RGB output, and the composite s…
... anyone else to do this mod. You have to cut ... a telly that has a scart input so are better ... (or even a project board), scart doesn't display properly on ... " Goodmans LCD but the scart piccy can look a bit ... look fine on everything using scart
but that ... -
What kind of joystick?Hi, I've just bought ZX Spectrum +2 (grey), my first. Near the joystick socket is caption "USE ONLY SINCLAIR JOYSTICK .....". Socket is standard DB9.…
I think I make this mod outside the speccy. I must ... make plans to make RGB-SCART cable to my new Spectrum ... -
What kind of joystick?Hi, I've just bought ZX Spectrum +2 (grey), my first. Near the joystick socket is caption "USE ONLY SINCLAIR JOYSTICK .....". Socket is standard DB9.…
... ]I think I make this mod outside the speccy. I must ... make plans to make RGB-SCART cable to my new Spectrum ... way.
As for SCART leads, I cheated and bought ... my +3 Scart lead ready made form Data ... -
Megadrive Reactor.[url]http://www.play.com/Gadgets/Gadgets/4-/16586389/Sega-Mega-Drive-Reactor-Wireless-Gaming-Console/Product.html[/url] Saw it in Morrisons last wee…
... SCART cables than it is to actually mod them. Anyway the only mod ... -
48k rubber key spectrum scart leadCan anyone tell me where I can get one from? Anyone have a spare? Have tried the usual sellers for the last month or 2, eBay, there are cables for…
... a composite wire and a scart convertor ? like used on nintendo ... liability as you have to mod the speccy
I ... -
48k rubber key spectrum scart leadCan anyone tell me where I can get one from? Anyone have a spare? Have tried the usual sellers for the last month or 2, eBay, there are cables for…
... cheap.. you'd need the scart+housing... 1 wire for composite ... .uk/Sinclair-Spectrum-Composite-Video-Mod-Kit-Scart-TV-/260684941076[/url]
Question about QL composite modI am servicing my two QL machines (capacitor replacement, pcb and plastics cleaning, microdrives head cleaning, 7805 replacement etc). I already fin…
... 've done a temporary composite mod for my QL (just to ... made up an RGB-->SCART connector for my QL. I ...+2 grey composite modWithout digging out the schematics, is it possible to do the composite mod like the 48k on these?
... transistors, re-did the comp mod, hardly much improvement, gave up ... a crystal clear picture via Scart on a 128k model then ...+2 grey composite modWithout digging out the schematics, is it possible to do the composite mod like the 48k on these?
... as the +3 composite mod. I posted it up ...
What about a composite mod on a Speccy 128k "toast ... for use with a TV Scart.
[B] ... an internal Y/C Svideo Mod, based on the Tea ... and +3 are almost peritel SCART standard (however require resistors ...+2 grey composite modWithout digging out the schematics, is it possible to do the composite mod like the 48k on these?
... the +2A is the better scart output including sound.[/QUOTE]
that's why this particular mod really interests meS-Video kit for 128k modelsAs discussed in this thread: [URL]http://www.worldofspectrum.org/forums/showthread.php?t=33768[/URL] My arm has been twisted to do an s-video mod ki…
... I first made up a SCART lead for my +2A the ... enough voltage to the BLANKING pin of the SCART plug. This requires ... 1v when connected to the BLANKING pin. My solution was to ... and switch to a different scart socket - that was on a ...Does the usual composite mod damage Speccies?Hi people, Just browsing eBay -as you do - and I noticed this auction: [url]http://cgi.ebay.co.uk/ZX-SPECTRUM-48K-GOOD-COND-COMPOSITE-OUTPUT-SINCLAI…
... contrary I like the composite mod, nothing wrong with it, in ... ][COLOR="Blue"]Component YPbPr / RGB Scart[/COLOR][/B]
I ...Spectrum ScartHi All, I cant seem to tune my +3 in using the RF (no signal). I have tried it on 3 LCD TV's & nothing (my Atari ST worked using the same RF cable).…
... afford another ?10 for a scart, & I dont really have ... could make a cheap composite mod, but since its different than ...128K blues, part +2: picture and tape driveI recently purchased an original (grey) +2 which sadly seems not to be fully working. The computer powers up but there is no way to obtain a stable p…
... may be required by the SCART socket on some TVs - or ... RGB was
'Pin 16 Blanking signal up'
you ...Cheap media player for speccy ?Although sort of non Sinclair hardware directly, I want a cheap media player to transfer wav / mp3 tapes (any other recommended formats?) to my specc…
... , the image through SCART and/or composite mod on LCDs is nowhere ...How can I fix it?Hi: This is how my Speccy looks: [IMG]https://lh5.googleusercontent.com/-Y2mtAhhpsis/TfIxgwhLYaI/AAAAAAAAAlQ/wscU6qfbeWc/s800/ABCD0009.JPG[/IMG] Ho…
... received the cable for the scart mod. I've changed my two ... the other Speccy, using the Scart?
[IMG]https://lh6.googleusercontent ... will try to make the mod again and will post some ... color and making the mod again for the Scart:
[IMG ...RGB cableI constructed an RGB cable to my +3 as per schematic on page 14 of this document here: [URL="http://mts.speccy.cz/doc/128_rgb.pdf"]http://mts.speccy.…
... outside the Scart connector and connecting that to the blanking pin would ...RGB cableI constructed an RGB cable to my +3 as per schematic on page 14 of this document here: [URL="http://mts.speccy.cz/doc/128_rgb.pdf"]http://mts.speccy.…
[QUOTE=orange;572861]well SCART can do both RGB and ... Ebay, but it need to mod the Speccy and soldering.
RGB cableI constructed an RGB cable to my +3 as per schematic on page 14 of this document here: [URL="http://mts.speccy.cz/doc/128_rgb.pdf"]http://mts.speccy.…
... br /> then do the composite mod:
[url]http://womblesretrorepairshack. ... mod.html[/url]
simply replace the connector with SCART ... ]http://en.wikipedia.org/wiki/SCART[/url]
... or use a simple adapter SCART-chinch.
or perhaps ...RGB cableI constructed an RGB cable to my +3 as per schematic on page 14 of this document here: [URL="http://mts.speccy.cz/doc/128_rgb.pdf"]http://mts.speccy.…
... -mod.html[/url]
simply replace the connector with SCART ... ]http://en.wikipedia.org/wiki/SCART[/url]
... or use a simple adapter SCART-chinch.
or perhaps your ... chinch input for composite besides SCART[/QUOTE]
Probably, ...
