-
How to contend memoryHow has this been achieved, electronically? Is there a "memory ready"-line for each bank, or something?
... a CS (chip select, active low) line to select this chip. The ... pin is set to logic 0, it is active. 'Active ... can be logic 1, logic 0, or high impedance. A ... +5 volts), and logic 0 usually means the pin is ... grounded (usually 0 volts). A chip that ... -
'orange' on a spectrumalways wondered why spectrums could never seem to achieve the colour orange? wasn't one of the default colours, and don't remember seeing anything th…
... /> 200 PAUSE 0: GO SUB scr2: PAUSE 0: GO SUB scr1 ... /> 1030 LET b(p)=0: IF t>=s THEN ... '
2010 LET n=0: FOR p=1 TO 8 ... br /> 7010 FOR i=0 TO 6911: POKE 49152+i ... /> 8030 LET b(4)=0
8040 GO SUB ...
9000 REM select second screen
9010 LET ... -
'orange' on a spectrumalways wondered why spectrums could never seem to achieve the colour orange? wasn't one of the default colours, and don't remember seeing anything th…
...
200 PAUSE 0: POKE syspage,23: PAUSE 0: POKE syspage,31 ... 7 in at 49152 and select main screen at 16384 as ... 7 in at 49152 and select second screen at 49152 as ... run the above snapshot, and select (f)ast mode, you will ... -
'orange' on a spectrumalways wondered why spectrums could never seem to achieve the colour orange? wasn't one of the default colours, and don't remember seeing anything th…
... version 3 did if you select "(s)ingle mode" you can ... .)
However, if you select (m)ulti mode it shows ... increasing numbers
ld d,0
ld hl,16384+6144 ... decreasing numbers
ld d,0
ld hl,49152+6144 ... -
CGC 2008 entry... help wanted please!Hi, I've written a BASIC game for the CGC2008. With a limited understanding of the hardware, I've written it in 128 BASIC, but have saved it out as …
... direct recording blocks when you select to save in tzx format ... 't tried in in version 0.666 yet either. I just ... -
VIC 20 emulation on the SpectrumI'm sure most people are aware of the my attempt at bringing the full Commodore experience to Sinclair users with the "Twenty Commodes" program. It e…
... time. It's best to select lower case mode first though ... occurred. My core was pushing '0' for this, only setting it ... -
BASin r14c - maintenance releaseAfter the recent discussions, BASin has been released as version 14c. It's only a maintenance release, and some of the really big new features are un…
... :
[CODE]10 FOR i=0 TO 1e7
20 LET ... expression "USR 32767" (as USR 0 doesn't do much :evil ... want to save your project. Select No. Now if you've ... -
BASin r14c - maintenance releaseAfter the recent discussions, BASin has been released as version 14c. It's only a maintenance release, and some of the really big new features are un…
... ]10 LET x=0
20 PRINT AT 0,0;65536-USR 7962 ... /> Whilst the program is running select View -> Debug windows -> ... -
ANN: Spud v0.201New version of Spud released. Nothing major just a few bugfixes thanks to user feedback. At the soon to be usual link [COLOR=#4040c0][URL]http://…
... Windows.
17 - Enter Debugger. Select Run -> Run (F5). Spud ... *,9 the result goes to 0.
21 - In calculator it ... /> 22 - In calculator, select Hex, select Word, enter FFFF, select Decimal, result is ... , if you set SP to 0 the Stack window seems to ... -
ANN: Spud v0.201New version of Spud released. Nothing major just a few bugfixes thanks to user feedback. At the soon to be usual link [COLOR=#4040c0][URL]http://…
... Windows.
17 - Enter Debugger. Select Run -> Run (F5). Spud ... *,9 the result goes to 0.
21 - In calculator it ... /> 22 - In calculator, select Hex, select Word, enter FFFF, select Decimal, result is ... , if you set SP to 0 the Stack window seems to ... -
RGB on speccy ?hi, just a question : are you aware of scene demo trying emulate rgb ? i was a bit ill last few days so laying in bad i come with a (stupid ?) idea.…
... mode, if you select "Save as", then select output format as "MLT ... Multitech"
"Multitech Glory 2.0" and:
..."Timex Screen" (okay ... -
BASin r14c - maintenance releaseAfter the recent discussions, BASin has been released as version 14c. It's only a maintenance release, and some of the really big new features are un…
... ]10 LET x=0
20 PRINT AT 0,0;65536-USR 7962 ... /> Whilst the program is running select View -> Debug windows -> ... -
A List Of Zx Spectrum Music EditorsWell, not for me actually, as 99,99% of them are for AY, covox and GS cards but several times some people asked about music editors for ZX Spectrum. …
... with ... in cells. Select first cell and press 0. You'll see ... you placed pattern with number 0 to start of the order ... -
Best game of 2008...!The WoS infoseek facility lists 56 games for 2008 - that's more than one a week! And it still might not cover absolutely everything out there. So, wh…
... =0&players=0&memory=0&language=0&country=0&licence=0 ... &publi=0&release=0 ... =3&loadpics=0[/url]
Just select "In-game screens ... -
Usr 0 ?I'm not sure I've ever seen this explained before, but why do some programs (only demos, as far as I can see, so far) need USR 0 mode when run on a 1…
... hazy, but when you USR 0 the speccy from 128 BASIC ... 48k mode. Whereas if you select 48 BASIC from the main ... -
Usr 0 ?I'm not sure I've ever seen this explained before, but why do some programs (only demos, as far as I can see, so far) need USR 0 mode when run on a 1…
... as whatever features USR 0 mode has over 128K ... mode. Whereas if you select 48 BASIC from the main ... br /> [quote=velesoft;325108]USR 0 erase 48kB memory(basic) and ... any advantages of USR 0 mode are open to ... required parameters for USR 0 mode itself, without of ... -
Help: OUT (port), A[deleted]
...
LD A, 0 ; 62,0 ; Prepare to send 0 to port
0 to speaker port in bit ... the top 8 bits to select the keyboard row to read ... -
New Spectrum Game - AlbatrossityMerry Christmas, and all that. Here's a little Christmas present for Spec-chums everywhere. Albatrossity is a crazy golf game which doesn't take it…
... /> 1/2 to select block
SPACE or 0 to set block ... -
Cro S2008Hi everybody!!! I hope this is right thread? :-) I want to share with you my new project. I call it ?S2008?? The idea was to build Spectrum48K clo…
... +3 without problems with any select rom page (48basic,128editor,syntax ... area is divide ram page(0-3). For example you ... DIVIDE with 128 editor(rom 0). As first you must ... write protect !!! All 16kB (0-16384) can be set as ... 16kB RAM page 0 or 1 and can ... -
[BASin] Bug report and question[B]1. Bug report:[/B] BASIC Editor behavior I'm using a variable to store the contents of the BC register. But the BASIC editor works strangely. I t…
...
2. With shift down, select one character to the left ... (the last 0)
2. Hit CTRL+C ... -
[BASin] Bug report and question[B]1. Bug report:[/B] BASIC Editor behavior I'm using a variable to store the contents of the BC register. But the BASIC editor works strangely. I t…
... end of RET
2. Select text up by one or ... begins at col x >=0 and ends at col x ... > 0
EDIT: and ... -
PC help requiredMy mate's XP desktop PC is connected to the 'net via broadband, through a Netgear wireless router, through which his Vista laptop also connected to t…
... , is TCP/IP is checked? Select TCP/IP click properties. Is ... card... *cough*... dead? (ping 127.0.0.1)
- Do the ... -
Html / Css HelpGuys I have been busting my gut over this problem all evening maybe you can help me out. If have the following code that presents me with a well lai…
... (Personally, I use XHTML 1.0 Transitional or Strict rather than ... 2) Add a margin-top = 0 so that we go easy ... left: 25%;
margin-top: 0;
}
DIV.formDiv ...
Gender:
-SELECT-
Male
Female
Girlfriend's computerI'm on my girlfriends computer atm -- one which she has asked me to sort out. It is a Vista computer which has reportedly slowed down since she fir…
... tab, click Delete Files. Select "Delete all offline content." ... PowerOffAfterShutdown
Values: 0=Default, 1=Power Off
0" (it will be set ... to "0" by default)
*********************************************************< ...ZXDS controlsHi Can the joypad and buttons on the DS be used like a joystick with ZXDS to play the games ? If so how do I set this up, cannot seem to work it o…
... Y[0] = Shift
L[0] = QUICK_SAVE
R[0] = QUICK_LOAD
Select[0] ... = PAUSE
Start[0] = 0 ... so you need to select Kempston using the keypad ...
- Always set SELECT to be pause
...ZXDS controlsHi Can the joypad and buttons on the DS be used like a joystick with ZXDS to play the games ? If so how do I set this up, cannot seem to work it o…
... Y[0] = Shift
L[0] = QUICK_SAVE
R[0] = QUICK_LOAD
Select[0] ... = PAUSE
Start[0] = 0 ... so you need to select Kempston using the keypad ...
- Always set SELECT to be pause
...Problem with loading Ultimate gamesHi all, I have a strange problem ( No..not that one ! ), its to do with the Ultimate Games. I use the method of loading games as WAVS from my laptop,…
... load in 48K mode, just select 48K mode from the main ... problem, press CAPS SHIFT and 0 (zero) to delete a character ...Re: TS2068 TC2068 Specy emulator cartridgesThere are several designs of emulator cartridges for these two Timex clones, but they all require an original 48K rom to work. This brings up a few q…
... (use OUT 244,3 to select it),
32kB LROS - ... of Dock,
32kB RAM - 0.3" case 62256, seen in ... of Dock,
32kB RAM - 0.6" case 62256, seen in ... RAM - two 62256, cases 0.3" and 0.6", seen in whole ... br /> 32kB RAM + 32kB ROM - 0.3" case 62256 (second 32kB ...Spectrum 2.0 (soon to be) updatedI've just pushed out a "beta test" of the next version of [url=http://spectrum20.org/]Spectrum 2.0[/url] to [url=http://staging.spectrum20.org/]stagi…
... the traffic to Spectrum 2.0 is from WoS, by which ... .
[quote]So I Select "Go" and on the left ... there.
[quote]I select the second choice (jack and ... ]Another thing I tried was select Atic Attack then find similar ...Fuse PSP has been updated!The brilliant FUSE PSP has just been updated to Fuse 0.10.0.1 (FUSE PSP released on January the 1st, 2009), and is available at: [url]http://psp.ako…
... updated to 0.10.0.2; libspectrum updated to 0.5.0.1
[*]Bugfix: Older (pre-0.10) button configuration files will ... new in Fuse 0.10.0.2 and libspectrum 0.5.0.1 (as ... the loading screens when I select a game to play but ...
